双吊联动吊装超长重大件货方案设计
2021-08-09付玉平王洪贵于洋
付玉平 王洪贵 于洋



摘要:为降低双吊联动吊装超长重大件货的作业风险,根据吊装作业时船舶稳性变化,将整个吊装方案分为货物转动路径规划和船舶稳性调节两个阶段进行设计。采用调拨左右舷压载水的方法调节船舶稳性,通过确定货物的无碰撞转动路径和各步骤所需调拨压载水量设计最终的吊装方案。以实船数据验证了该吊装方案设计方法的可行性。
关键词:
双吊联动; 超长重大件货; 转动路径规划; 稳性调节; 吊装方案
中图分类号: U661.2;U695.2+6
文献标志码: A
Design on dual-crane tandem lifting plan for over-long and heavy cargo
FU Yuping, WANG Honggui, YU Yang
(Navigation College, Dalian Maritime University, Dalian 116026, Liaoning, China)
Abstract:
To reduce the risk of dual-crane tandem lifting operation for over-long and heavy cargo,
according to the change of ship stability during the lifting operation process, the whole lifting plan design is divided into two stages, the cargo rotation path planning stage and the ship stability regulation stage. The ship stability is adjusted by transferring the ballast water between portside and starboard. The final lifting plan is designed by determining the non-collision rotation path of the cargo and the amount of transferred ballast water at each step. The feasibility of the lifting plan design method is verified by real ship data.
Key words:
dual-crane tandem; over-long and heavy cargo; rotation path planning; stability regulation; lifting plan
收稿日期: 2020-08-05
修回日期: 2020-11-09
基金項目: 国家自然科学基金(51379026)
作者简介:
付玉平(1995—),男,黑龙江绥化人,硕士研究生,研究方向为船舶重大件运输,(E-mail)fyp_gaston@163.com;
王洪贵(1980—),男,吉林九台人,副教授,博士研究生,研究方向为船舶运输保障技术,(E-mail)wanghonggui@dlmu.edu.cn
0 引 言
双吊联动操作主要用于吊装长度和质量超过单吊作业能力的货物,常见于重吊船和多用途船。该项操作的复杂程度和危险概率较之单吊的高,尤其是当货物质量较大且长度超过双吊纵向轴心间距时,既要考虑货物在移动过程中是否与船体和吊机间留有一定的安全距离,还需注意在货物吊起和横移过程中所引起的船舶稳性和横倾变化是否可控[1-2]。目前,国外对双吊联动吊装超长重大件货的研究比较成熟,很多公司都有相对完善的操作规范,正常海况下基本可以实现无风险吊装[3];但国内的此类研究与之相比还有一定差距,很多影响因素都被假定处于理想状态或被直接忽略。……
