APP下载

基于Minitab的DOE实验设计改进生产质量

2020-10-20万琳

价值工程 2020年28期

摘要:从企业的调研中了解到制卡企业印刷基材与PVC薄膜层压后的粘合力是其一项重要的指标,G公司使用剥离机测量剥离力,其要求大于6N的标准,结合企业生产现状,在公司运用6Sigma中的CTQ关键质量特性分析油墨印刷质量对粘合力影响主因,因此设计了一次DOE实验,通过进行双因子图分析,结合主效应图,立方图分析剥离力影响因素,得到最佳组合参数,而后优化印刷机工艺参数,在实际生产中得以验证改善粘合力强度。

Abstract: We learn form enterprise research that the adhesive force between the printing substrate and PVC thin film after laminated is an important index. G company uses the peel tester machine to measure the force,the standard requires more than 6N. To combine with the current situation of the enterprise production, by using 6Sigma method we analyze CTQ critical quality characteristics. Ink printing quality is the main factor of the adhesion, so we design a DOE experiment, through the analysis of double factor plots, combine main effects plots and Cubic plot to analyze the main influencing factors of adhesive force. The optimal combination parameter is obtained, and then the process parameters of the printing machine are optimized, which has been verified and improved the adhesive strength in actual production.

關键词:质量改进;六西格玛;DOE设计;Minitab

Key words: quality improvement;6Sigma;DOE design;Minitab

中图分类号:F203                                        文献标识码:A                                  文章编号:1006-4311(2020)28-0243-03

1  研究背景

以发展我国电子货币为目的,以电子货币应用为重点的各类卡基应用系统工程,将专用的集成电路芯片镶嵌于符合ISO7816标准的PVC(或ABS等)塑料基片中,封装成外形与磁卡类似的卡片形式,经设计、印刷、封装等工序制成。对于多批次多种类生产的制造业对质量的要求越来越高,受产品质量、生产成本、客户交货期等因素影响,亟需改变生产模式,引入六西格玛先进的精益生产理念,能快速、高效、准确的找到问题点,并予以解决满足市场竞争需求。

1.1 文献综述

智能卡的剥离力是行业规范的一项重要的要求,剥离力的影响因素有很多比如卡表面印刷油墨黏度、PVC薄膜的胶特性、层压工艺等等,而供应商提供的PVC薄膜胶特性在来料检验处一直较为稳定均可达到行业规范要求,层压设备及工艺的过程能力相对较为稳定,从技术角度研究影响印刷质量……

登录APP查看全文