光面爆破技术在东秀隧道中的应用
2020-09-22杨辅军
杨辅军



摘要:光面爆破是一种可控制开挖輪廓面的爆破技术,通过合理的控制爆破的作用范围及方向,可使爆破后的岩面光滑平整,岩面裂隙少,岩壁稳定性增加,从而实现超挖、欠挖和支护的工作量的减少。本文以荔玉高速3标段东秀隧道为例,通过现场调研分析总结隧道开挖时的问题,及多次光面爆破试验,不断优化爆破参数,总结出了适合于该隧道Ⅳ~Ⅴ围岩的爆破方案。经过试验可以看出光面爆破可以有效的控制超欠挖现象,还在一定程度上保持围岩的相对稳定,为隧道施工及经济效益带来一定的成效。
关键词:隧道掘进;光面爆破;超欠挖;导爆索
Abstract: Smooth blasting is a blasting technique for controlled excavation profile. Through the rational controlling of the scope and direction of blasting, the rock surface after blasting has smooth, the phenomenon of rock cracking has been decreased, but the stability of palisades has been enhanced, which achieve the reducing workload in over-break, under-break and support. The paper summarizes the blasting scheme adapting to the Ⅳ and Ⅴ adjoining rock by means of the analysis of problem for field survey when tunnel excavated, multiple smooth blasting test, the constant optimizing of blast index. Results of smooth blasting test show that the blasting scheme can effectively control the over-under-excavated phenomenon, and maintain the relative stability of adjoining rock, which can bring some benefits in tunnel construction and economy.
0 引言
在隧道掘进中,最常见的方法是钻孔掘进,但这种常规掘进方法会严重影响周围岩石的稳定性,往往会导致超挖和欠挖,从而大大提高了挖掘的成本。光面爆破能有效地控制围岩表面轮廓,并能保持一个相对稳定的结构,围绕科学技术,在苛刻的爆破施工隧道,地铁等对周边轮廓的效果很好,可周围的异形横截面,从而符合设计要求的比较表面,平坦自由面的规则。
光面爆破对周边围岩造成的扰动相对较小,可以有效地降低应力集中,从而减少应力集中所引起的塌方,这种方法在完整性较好的岩体中取得良好的[1]效果,但在围岩强度较差、岩体较破碎的岩体中,岩石爆破对围岩更容易引起超挖现象,导致支护成本增加。因此,本文针对荔玉高速东秀隧道岩体出现较为严重的破碎,岩石节理的发育等现象,爆破队经过对隧道原有方案的分析及调查,提出合理采用的光面爆破方案并取得较好的效果。……
