APP下载

一种简单快速评估压缩机厂房内噪声的方法

2020-08-31唐佳丽孙鑫石翠萍

价值工程 2020年23期

唐佳丽 孙鑫 石翠萍

摘要:大型压缩机广泛应用于石油、化工、航空等领域。压缩机厂房主要有三类噪声源:压缩机组、管网、及调节阀。但是,一般厂房降噪设计的输入仅考虑压缩机组,这样可能导致厂房噪声排放不符合标准要求,导致需后期进行噪声治理。厂房建设前,无法做到通过现场测试得到厂房噪声。而动则几千平方的厂房尺寸,且设置多台套压缩机组、大量管网阀门,使得有限元分析计算量巨大,对厂房内的噪声分布进行精确计算的成本巨大。本文基于理论及经验提出了一种可简单快速评估压缩机厂房内噪声的方法,并通过与某已建压缩机厂房内声级计测得的A计权声压级进行比对证明该方法切实可行。采用本方法考虑了厂房内所有声源后得出的声压级频谱,更有利于指导厂房各方面的噪声设计。

Abstract: Large compressors are widely used in petroleum, chemical and aviation industry. There are three major noise sources: compressors, pipe network, and control valves. However, noise reduction design input for plants are usually compressors, which may result in that noise emission does not meet the relevant standard. These plants should take steps to reduce noise emission, such as sound-absorbing dispose for walls, etc. The noise in plant cannot be measured before the plant being constructed. The computation cost for noise distribution in plant with FEM calculation is huge, considering several thousand square meters of plant space and several noise sources. A simple and quick evaluation method for noise in compressor plant, which is based on theory and experience, is presented in this paper. The method is proven with the comparison between the method results and measured A-weighted sound pressure level (SPL) in a compressor plant. The calculated SPL spectrum is beneficial to guide the noise reduction design for plants.

关键词:声压级;噪声评估;压缩机厂房;简单快速

Key words: sound pressure level (SPL);noise evaluation;compressor plant;simple and quick

中图分类号:TB535                                      文獻标识码:A                                  文章编号:1006-4311(2020)23-0135-03

0  引言

大型压缩机广泛应用于石油、化工[1]、航空[2]、天然气[3]等领域,压缩机所生产的压缩气体通过管网输送至指定用户。压缩机在运行过程中会产生较高的噪声[3-6],输送压缩气体的管网上一般布置有调节阀,在节流状态下也会产生噪声[7],压缩机及调节阀的噪声均会在管道内传播,通过管壁向外辐射噪声,管道辐射噪声具有线声源特点,衰减慢,产生的噪声影响不容小觑[8]。

通常,为了使压缩机厂房的噪声排放达到《GB12348-2008 工业企业厂界环境噪声排放标准》,对厂房的屋顶、墙壁、进排气口、门窗等均需根据降噪基本理论进行设计[3,4],一般的降噪设计输入均取厂房内压缩机的总声级[3, 4]或声功率频谱[9]。……

登录APP查看全文