“枫停”物联网智能车位锁控制系统
2020-08-31赵世民刘奇锋李淑芝
赵世民 刘奇锋 李淑芝



摘 要:针对目前私家车保有量快速增长,城市车位资源紧缺,停车困难,设计了一款基于物联网平台和MQTT传输协议的“枫停”智能车位锁控制系统。使用IOT设备、移动端、服务器三端数据交互,实现软硬件结合的APP控制系统。软件可监控附近的车位状态、车位锁状态,以实现移动端对硬件的操控。对比现在市场上已有的多种蓝牙车位锁,该系统具有信号稳定、设备成本低、移动端使用便捷和寻找车位周期短等优势。
关键词:OneNET;MQTT;物联网技术;智慧停车;智能车位锁
中图分类号:TP39 文献标识码:A
Abstract: Feng Ting Intelligent Parking Lock Control System is developed to provide solution to the shortage of parking spaces caused by increasing volume of private cars. This is an APP control system which is designed based on the Internet of Things (IoT) platform and MQTT (Message Queuing Telemetry Transport) transfer protocol, using interactive data collected from IoT devices, mobile terminals and servers. The APP is able to monitor the nearby parking occupancy and the parking lock status, which make it possible for users to control the hardware by mobile terminal. Compared with the already existing Bluetooth parking locks in the market, this system has more advantages, such as stable signal, low equipment cost, convenient use of mobile terminal and short period for finding parking spaces.
Keywords: OneNET; MQTT; Internet of Things; intelligent parking; intelligent parking lock
1 引言(Introduction)
随着私家车数量的增多,车位资源日益稀少,停车困难成为困扰车主的首要问题。造成停车难的主要原因有很多种:停车场和固定车位的紧缺、路边乱停乱放的现象、车位使用不合理、寻找空闲车位困难[1]等。更重要的是车主在寻找车位的过程中也会造成局部交通堵塞、增加污染排放和噪声等问题,甚至因车位引发市民之间的矛盾和交通事故。目前市面上的车位锁主要有以下几种:
(1)金属机械车位锁:这种车位锁不仅使用麻烦,上锁、开锁都需要下车手动操作。
(2)蓝牙车位锁[2]:蓝牙遥控有效距离较低,在车内可能无法成功下发指令。无法实现共享车位状态。
(3)单片机伸缩型车位锁:需要专用遥控器,或需要识别车牌号。此类车锁独立性较强,没有提供数据上传、车锁定位[3]等功能。不方便集中管理,无法实现车位信息共享。
本文提出的基于OneNET[4]的“枫停”车位锁不依托蓝牙控制,采用NB-IoT通讯模块由OneNET物联网平台发送指令,车位锁实时返回数据给平台,实现对多个车位锁的集中管理。……
