APP下载

油井高回压影响因素的敏感性分析

2020-08-24初勇强魏立新何昭君

当代化工 2020年4期

初勇强 魏立新 何昭君

摘      要: 油井产出液中高含水,使产出液的流动性得以提高,对于地面低温集输了提供有利条件。但低温集输工艺易导致多数油井出现回压上升的现象,现采用系统单因素敏感性分析方法,结合Beggs-Brill压降计算方法,对日产液量、含水率、井口出油温度、集油距离和管道内径五个因素进行敏感性分析,并结合现场测试数据,提出治理措施。研究表明:管道内径和井口出油温度对井口回压的影响最敏感,其次为含水率,日产液量和集油距离最不敏感。因此为防止因井口回压高而影响油田的正常生产,可以通过辅助掺热水流程来提高井口出油温度,降低井口回压,提高生产效率。

关  键  词:低温集输;井口高回压;Beggs-Brill模型;敏感性分析

中图分类号:TQ022.12+5     文献标识码: A     文章编号: 1671-0460(2020)04-0626-05

Abstract: The high water cut in the produced fluid of oil well can improve the fluidity, and creates a good prerequisite for implementing low-temperature gathering and transportation. However, low-temperature gathering and transportation process can easily lead to back pressure rise in the most of oil wells. By using the single factor sensitivity analysis method, the sensitivity analysis on the liquid production, the water cut, the oil temperature, the oil gathering distance and the pipe diameter was carried out with the Beggs-Brill model calculation method. And combined with the field test data, the control measures were proposed. The results showed that: the pipe diameter and the oil temperature were the most sensitive factor, followed by the water cut, the liquid production and the oil gathering distance were the least sensitive factor. Therefore, in order to prevent the high back pressure from affecting the normal production of the oil field, the oil temperature should be increased to reduce back pressure and improve production efficiency by assisting the hot-water mixing process.

Key words: Low-temperature gathering and transportation; High back-pressure; Beggs-Brill model; Sensitivity analysis

隨着我国陆上油田开发的深入,产出液含水率逐年上升,这为低温集输创造了良好的条件。在工程实践中,绝大多数油田开始取消了部分井场加热炉的使用,逐渐采用低温集输工艺,但由于冬季气候寒冷,集输条件相当恶劣,部分不掺热水的集油管道会发生井口回压偏高的现象[1-4]。而井口回压升高往往会导致集油管道发生堵塞,为保证集输过程稳定有序地进行,需要频繁的冲洗管线。除此之外,井口高回压还会致使抽油机的耗能增加[4,5]。

为此,低温集输产生的井口高回压是当下油田地面集输面临的困境[4-6]。总结多年来对低温集输边界条件的相关研究,从结果来看,单井回油温度受到的关注最多,除此之外,也有学者综合了其他因素,如原油物性、产液量、管道尺寸和含水率等,用以确定低温集输的可行性[4,7-9]。……

登录APP查看全文