APP下载

化工水体中有机物分析预处理技术研究

2020-08-24杨敏

当代化工 2020年4期
关键词:工艺

杨敏

摘      要:为了解决高浓度化工废水对环境的污染问题,以典型的多环芳烃类高浓度化工废水为例,多环芳烃类高浓度化工废水在生产过程中容易进入水体,对环境的危害大,高盐有机废水的成分中含有大量可溶性无机盐,对生物处理会产生抑制作用。选用UV-Fenton高级氧化技术,强氧化性能把有机物转化为水、二氧化碳和无机盐,所投加氧化剂也不会产生有害物质,具有很好的应用价值。采用该氧化技术对高盐有机废水进行处理,探讨最佳工艺反应条件和反应机理。

关  键  词:有机废水;高级厌氧;预处理;试验研究

中图分类号:X 703       文献标识码: A       文章编号: 1671-0460(2020)04-0556-05

Abstract: In order to solve the pollution problem of high-concentration chemical waste water to the environment, the typical polycyclic aromatic hydrocarbon high-concentration chemical wastewater is taken as an example, and the high-concentration chemical wastewater of polycyclic aromatic hydrocarbon is easy to enter the water body in the production process, and the harm to the environment is large, The high-salt organic waste water contains a large amount of soluble inorganic salt, which can inhibit the biological treatment. In this paper, the UV-Fenton advanced oxidation technology was used to convert the organic matter into water, carbon dioxide and inorganic salts. The addition of the oxidizing agent does not produce harmful substances, and has good application value. Advanced UV-Fenton oxidation technology was used to treat high-salt organic wastewater, and the optimum reaction conditions of UV-Fenton in the treatment of high-salt organic wastewater were investigated as well as the reaction mechanism.

Key words: Organic wastewater; Advanced anaerobics; Pretreatment; Experimental study

高级氧化技术因其可氧化有机物,且不产生二次污染等特性,越来越受到人们的关注。难降解有机废水是目前比较难治理的废水之一,利用羟基的强氧化性来处理难降解有机废水,可以提高对废水的处理效果[1]。本课题研究立足于理论分析和试验研究相结合,在大量阅读、广泛调研、国内外文献的基础上选取了两种高级氧化技术,分别为 UV-Fenton、Fenton。对应两种难降解有机废水,分别为多环芳烃类偶氮染料-刚果红溶液、难生物降解-高盐有机废水。在得到各反应的最适条件的同时,也初步探索其反应机理[2]。

1  实验部分

1.1  实验试剂、材料与装置

如果没有特别提及,本研究中使用的化学试剂是优等品,并且制备溶液所使用的为超纯水(μs/cm)。在每次实验之前制备好Fe2+和H2O2作为储备溶液[3]。实验中使用的高盐有机废水来自于电镀厂,经废水回用系统处理后排出, 如表1所示。……

登录APP查看全文

猜你喜欢

工艺
锆-钛焊接工艺在压力容器制造中的应用研究
金属钛的制备工艺
转炉高效复合吹炼工艺的开发与应用
工艺的概述及鉴定要点
5-氯-1-茚酮合成工艺改进
螺甲螨酯的合成工艺研究
压力缸的摆辗挤压工艺及模具设计
石油化工工艺的探讨
一段锌氧压浸出与焙烧浸出工艺的比较
FINEX工艺与高炉工艺的比较