APP下载

基于Solidworks的微波消融冷却泵的设计

2020-07-04李宁袁航

现代信息科技 2020年3期

李宁 袁航

摘  要:微波消融仪冷却泵的作用是将微波消融手术时冷却用的生理盐水输入到微波针头部位,使其通过微波消融针头形成循环流动,从而使针头温度处于合理范围。采用当前广泛应用的3D设计软件Solidworks设计冷却泵,设计了一种偏心轮机构,实现压块的自动抬起动作。通过电子样机的设计优化,避免了通过制造物理样机反复修改测试,节约了大量设计时间。最后对物理样机进行了测试,结果证明使用Solidworks设计的冷却泵符合设计目标。

关键词:微波消融仪;冷却泵;蠕动泵;Solidworks

中图分类号:TP391.7      文献标识码:A 文章编号:2096-4706(2020)03-0175-03

Abstract:The function of the cooling pump of the microwave ablation instrument is to input the normal saline used for cooling during the microwave ablation operation into the position of the microwave needle,so that it can form circulation flow through the microwave ablation needle,so that the temperature of the needle is in a reasonable range. The 3D design software Solidworks,which is widely used at present,is used to design the cooling pump,and an eccentric mechanism is designed to realize the automatic lifting action of the pressure block. Through the design optimization of the electronic prototype,it avoids the repeated modification and test of the physical prototype,and saves a lot of design time. Finally,the physical prototype is tested,and the results show that the cooling pump designed by Solidworks meets the design objectives.

Keywords:microwave ablation instrument;cooling pump;peristaltic pump;Solidworks

0  引  言

微波消融术是一种常见的微创手术,具有创面小、操作简单、副作用小、恢复快的优点,从而在治疗肿瘤方面有广泛的应用[1]。冷却泵是微波消融仪必不可少的一部分[2],它的作用是将冷却用生理盐水打到微波消融针头内使其循环流动,避免因温度过高而烧坏正常组织[3],控制微波天线针头的温度范围在合理范围[4]。因为蠕动泵具有精度高、无污染、维护简单等优点微波消融仪的冷却系统一般都采用蠕动泵作为冷却泵[5]。微波消融针内部的冷却水路非常狭窄,大概只有0.5 mm的直径,长度则可以达到300.0 mm~500.0 mm。所以要精确控制针头的温度,需要一个冷却泵使水以一定的流量通过冷却水路,循环流动带走针头过多的热量[6],因为水路狭窄,存在很大阻力,这就需要冷却泵有比较大的压力才能保持一定的流量。这个压力一般需要4~6 bar。因该泵为医疗用产品,设计应尽量使其使用方便。……

登录APP查看全文