汽车高速转向工况下的稳定性控制研究
2020-06-03张喜清黄鑫蔡松岩张宏伟
张喜清 黄鑫 蔡松岩 张宏伟



摘 要:为提高汽车在高速转弯工况下的稳定性,文章提出一种基于模糊控制的制动力控制系统。将控制目标设置为车辆的质心侧偏角与车辆的质心侧偏角,通过差动制动产生的补偿力矩进行对车辆行驶姿态的调整。根据CARSIM数据库中以有车型建立整车模型,利用MATLAB/SIMULINK建立差动控制系统,并采用CARSIM- MATLAB联合仿真的方法针对不同路面、不同车速进行分析。仿真结果表明在不同速度、不同路面下均能取得比较明显的效果,从而提高在高速转弯工况下的操纵稳定性。
关键词:差动制动;操纵稳定性;高速转向;模糊控制
中图分类号:U461.6 文献标识码:A 文章编号:1671-7988(2020)09-119-05
Research on Stability Control of Vehicle under High Speed Steering Condition*
Zhang Xiqing, Huang Xin, Cai Songyan, Zhang Hongwei
( Taiyuan Science and Technology Capital Engineering College, Shanxi Taiyuan 030024 )
Abstract: In order to improve the stability of the car under high-speed turning conditions, a braking force control system based on fuzzy control is proposed in this paper. The control target is set to the vehicle's centroid side deflection angle and the vehicle's centroid side deflection angle, and the driving attitude of the vehicle is adjusted by the compensation torque generated by the differential braking. According to the CARSIM database, a complete vehicle model is established with existing models, a differential control system is established using MATLAB / SIMULINK, and a CARSIM-MATLAB joint simulation method is used to analyze different road surfaces and different vehicle speeds. Simulation results show that obvious effects can be obtained at different speeds and different road surfaces, thereby improving the steering stability under high-speed turning conditions.
Keywords: Differential braking; Handling stability; High speed steering; Fuzzy control
CLC NO.: U461.6 Document Code: A Article ID: 1671-7988(2020)09-119-05
1 前言
汽车制动系统是汽车在行驶过程中确保其安全行驶最为关键的系统。差动制动系统与普通制动系统相比,通过控制单元对各个车轮单独制动,在原有基础上无需增加机械结构。同时,通过对不同车轮施加制动力能达到對轮胎横向力的调节的效果,这是与传统制动系统相比最为明显的优势。随着多轮独立驱动研究的深入以及应用,差动制动也逐渐成为研究热点,如何控制各个制动轮的制动力矩,如何协调各个制动轮制动配合,成为亟待解决的研究内容。
汽车在高速行驶遇到弯道时,首先会制动来保证安全通过弯道,此时轮胎受到的制动力相当大,侧偏力会有明显的下降,是因为此时轮胎的附着能力到达了极限,轮胎的纵向制动消耗来的大部分的附着力,而侧向能利用的附着力很少[1]。……
