3-RPS并联隔振平台的建模与控制
2020-05-28孙政赵强王娜秦玉彬
孙政 赵强 王娜 秦玉彬



摘 要:针对传统被动隔振装置隔振效果较差、使用寿命较短的问题,本文以3-RPS并联机构为主体建立并联隔振平台,通过拉格朗日法求解并联隔振平台系统动力学方程,在Matlab/Simulink中设计基于天棚模型的半主动on-off控制器。为解决并联机构系统模型存在非线性化和理想化等问题,应用Sim Mechanics建立并联隔振平台系统物理模型,通过对并联隔振平台单个支链分别进行on-off控制,提高隔振平台的隔振性能。仿真结果表明:相比于被动隔振平台,含有on-off控制器的隔振平台可以有效抑制振幅,具有良好的隔振效果。
关键词:并联机构;隔振平台;天棚模型;on-off控制
Abstract:Aiming at the problems of poor vibration isolation effect and short service life of traditional passive vibration isolation device, this paper takes 3-RPS parallel mechanism as the main body to establish a parallel vibration isolation platform, solves the system dynamics equation of the parallel vibration isolation platform by Lagrange method, and designs a semi-active on-off controller based on canopy model in Matlab/Simulink. Due to the lack of nonlinearity and idealization of the parallel mechanism system model, this paper established a physical model of the parallel vibration isolation platform system based on SimMechanics, and improved the vibration isolation performance of the parallel vibration isolation platform through on-off control of a single branch chain of the parallel vibration isolation platform. The simulation results show that compared with the passive vibration isolation platform, the vibration isolation platform with on-off controller can effectively suppress the amplitude and has good vibration isolation effect.
Keywords:Parallel mechanism; vibration isolation platform; skyhook model; on-off control
0 引言
降低振动对各类机械设备的冲击,延长设备使用寿命,提高设备运转平顺性是当今研究的一大热点[1-2]。目前,采用传统橡胶或特殊塑料等弹性元件进行隔振的方式,已经不能满足高精密、高运转的机械设备对隔振的需求,且橡胶和塑料易老化、技术性能指标较差、使用寿命较短、隔振效果较差且仅能实现单维隔振[3]。因此,本文以并联机构为隔振平台主体,设计了并联隔振平台。并联机构是由多个并联支链组成的闭环运动机构,具有刚度大、运动惯量小、负载能力强和结构稳定等优点[4-6],基于并联机构的隔振平台为多维隔振提供了一种新的解决方案。目前,国内外学者对并联机构用于多维隔振做了许多研究,LE等[7]利用两个对称负刚度弹簧并联一个正刚度弹簧的机构改善了汽车……
