一种新型铜铝接线鼻子的研制与应用
2018-12-10余万荣郭建平吴磊况达郭林潘祖华彭程
余万荣 郭建平 吴磊 况达 郭林 潘祖华 彭程
摘 要:铜铝接线鼻子作为配网变压器等设备铜质桩头及线路铝导线之间连接的主要配件,被广泛使用于设备施工中,但传统铜铝接线鼻子在产品设计及焊接工艺上没有全面考虑铜铝两种金属通过焊接后,在通电运行发热的状态下,由于传统铜铝接线鼻子两种金属焊接面较小,在通电运行状态下、特定工作温度作用下,因两种金属具有不同的线性膨胀系数导致铜铝接线鼻子屡屡发生焊面脱焊、断裂。多年来,因铜铝接线鼻子断裂事故的频繁发生,严重影响线路的供电正常运行,大大增加了维护人员的线路维护维修工作量。经过我局一线工作人员细心研究推演,潜心设计,从传统铜铝接线鼻子的不足之处入手,通过增大铜铝焊接面积,结合两种金属的楔型镶嵌焊接工艺的使用,通过工艺弥补了两种金属线性膨胀系数的不同导致的产品缺陷,彻底解决传统铜铝鼻子存在的产品设计问题,对于线路保畅通,减少线路事故次数和检修,消除设备隐患,使用成本质优价廉的特点,具有积极的意义。
关键词:两种金属点接触变为面接触;接触可靠;使用寿命长;不易断裂
中图分类号:TM75 文献标志码:A 文章编号:2095-2945(2018)30-0034-02
Abstract: The copper-aluminum connection nose is widely used in the equipment construction as the main accessory of the connection between the copper pile head and the aluminum wire of the equipment such as the distribution network transformer and so on. However, the traditional Cu-Al connection nose has not been fully considered in the product design and welding process. After the welding of the two metals, the welding surface of the two kinds of metal is smaller than that of the traditional Cu-Al connection nose under the condition of heating during electrified operation. Under the condition of electrified operation and special working temperature, the disconnection and fracture of copper and aluminum connection noses often occur due to the different linear expansion coefficients of the two metals. For many years, the frequent occurrence of the broken nose accident of copper and aluminum wiring has seriously affected the normal operation of power supply of the line, and greatly increased the maintenance workload of the maintenance personnel. After careful study and deduction by the staff in the front line of our bureau, concentrated design, starting with the shortcomings of the traditional copper-aluminum connection nose, by increasing the copper-aluminum welding area, Based on the use of two kinds of metal wedge-shaped inlay welding technology, the product defects caused by the different linear expansion coefficients of the two metals are made up by the process, and the product design problems existing in the traditional copper and aluminum noses are thoroughly solved, so as to ensure the smooth flow of the lines, reduce the accident times and repair of the lines, and eliminate the hidden dangers of the equipment. The use of high quality and low cost features, has a positive significance.
Keywords: point contact of two metals into surface contact; reliable contact; long service life; not easy to break
1 研究背景
銅铝鼻子常用于电缆末端与电器设备的连接和接续,其连接牢固可靠、安全,导线连接至变压器时由于导线是铝线,端子是铜制结构,因此需要使用到铜铝鼻子使其连接良好,但现有的铜铝鼻子的铝制电缆连接头与铜制固定端头连接是点接触,接触面由于材质的差异容易断裂,需时常检修,费时费力,成本高。……
