冷再生技术在公路养护水泥稳定碎石基层中的应用
2018-11-10杨安然
杨安然
【摘 要】随着国民经济的发展,公路工程项目日益增多,随之而来的是公路养护项目也日益增多。对于公路养护的方式有很多種,而冷再生技术是一种成本低、可有效节约资源的一种可行性养护方式,在很多公路养护项目中被应用。基于此,文章结合工程实例,采用冷再生技术对其进行养护,对该技术的特点进行了总结,并且从原路面的处理、配合比设计、混合料拌合、运输、摊铺、碾压、接缝处理等施工工艺和施工方法进行了分析,从而更好的提高工程质量。
【关键词】冷再生技术;公路;养护;水泥稳定碎石基层
中图分类号: U418.8 文献标识码: A 文章编号: 2095-2457(2018)17-0153-002
DOI:10.19694/j.cnki.issn2095-2457.2018.17.076
【Abstract】With the development of the national economy, highway engineering projects are increasing, and the road maintenance projects are also increasing. There are many ways to maintain roads, and cold recycling technology is a kind of feasible maintenance method with low cost and effective resource saving. It is applied in many road maintenance projects. Based on this, the article combines engineering examples, adopts cold regeneration technology to maintain it, summarizes the characteristics of the technology, and from the original road surface treatment, mix design, mixture mixing, transportation, paving, rolling, Construction techniques and construction methods such as joint treatment were analyzed to improve the quality of the project.
【Key words】Cold recycling technology;Highway;Conservation;Cement stabilized macadam base
1 工程概况
某省道K395-K405段公路养护大中修工程,路线全长10km,公路等级为二级,路基宽12m,原路面为沥青混凝土路面,由于交通量的日益增加,加之运输重型车辆大量增加,该路段已出现了不同程度的纵、横向裂缝及坑槽,结构强度下降,影响了行车的舒适性和安全性。经勘察,原水稳基层大部分已破碎,路面强度严重不足,经综合比选,决定采用就地冷再生水稳基层方案。先将老路原沥青路面和水泥稳定碎石基层进行就地冷再生(再生厚度25cm),再加铺下封层+沥青碎石混凝土。该工程2016年6月1日开工,2016年9月30日全部完工,总工期122日历天。本工程为大中修项目施工采用水泥稳定碎石就地冷再生技术,主要目的是节约资源,保护环境,恢复公路原有的使用功能,提交交通运输能力,服务水平和行车舒适性,维持原有公路的线性。……
