APP下载

杉木、马尾松木粉增强高密度聚乙烯复合材料的老化性能1)

2018-10-23曹岩徐海龙郝建秀王海刚

东北林业大学学报 2018年10期
关键词:力学性能复合材料

曹岩 徐海龙 郝建秀 王海刚

(贵州民族大学,贵阳,550025) (生物质材料科学与技术教育部重点实验室(东北林业大学))

In order to effectively use wood processing residual waste of the main species of forest harvesting and processing in Guizhou Province and waste plastic, the high density polyethylene (HDPE) composites reinforced by Cunninghamia lanceolate and Pinus massoniana wood flour were prepared by extrusion molding, respectively. After 12 months’ indoor and outdoor natural aging, surface color, density, bending, tensile, impact and other physical and mechanical properties before and after aging were compared, and dynamic mechanical properties of the composites were also analyzed. The indoor aging made the surface of the composites dim lightness, and colors moved in the direction of red and yellow, and outdoor aging made the surface of the composites lightness to bleach, and colors moved in the direction of green and blue. The tensile properties of composites were considerably affected by aging. Outdoor environment raised the aging decomposition rate of the wood plastic composites. Aging resistance of C. lanceolate/HDPE composites were better than that of P. massoniana/HDPE composites.

贵州省位于中国季风区,纬度偏低,受夏季风影响强烈,所以大部分地区气候温暖湿润,且受山地自然条件和森林植被茂密等因素的影响,形成了冬季无严寒,夏季无酷暑的宜人气候。贵州省属于亚热带湿润季风气候类型,气候特点主要表现在以下4个方面[1-4]:①全省大部分地区气候温和宜人,境内包括中部、北部和西南部在内的占全省大部分地区,年平均气温在15 ℃。②常年雨量充沛,降雨日数较多,相对湿度较大,全省各地多年平均年降水量大部分地区在1 200 mm,最多值接近1 600 mm,最少值约为850 mm。③光照条件较差,阴天多,日照少。全省大部分地区年日照时间在1 200~1 600 h,年日照时间比同纬度的我国东部地区少三分之一以上,是全国日照最少的地区之一。全省大部分地区的年相对湿度高达82%,且不同季节之间的变幅较小。④本省地处低纬山区,地势高差悬殊,气候特点在垂直方向差异较大,立体气候明显。

贵州省温和宜人的气候给木塑复合材料(WPC)的户外应用提供了有利的条件,但是多雨湿润的天气不利于延长WPC的使用寿命[5]。笔者选取贵州省优势树种杉木[Cunninghamialanceolata(Lamb.) Hook.]和马尾松(PinusmassonianaLamb.)木粉[6-7],用以增强高密度聚乙烯(HDPE)制备杉木/HDPE复合材料和马尾松/HDPE复合材料,研究户外自然老化和室内自然老化对两种复合材料的材色和密度等物理性能和弯曲、拉伸和冲击等力学性能的影响,并分析其动态力学性能,为延长贵州省优势树种增强聚合物复合材料的使用寿命,提高该种产品在贵州省的使用安全性,拓宽其应用范围提供参考。……

登录APP查看全文

猜你喜欢

力学性能复合材料
反挤压Zn-Mn二元合金的微观组织与力学性能
Pr对20MnSi力学性能的影响
金属复合材料在机械制造中的应用研究
纤维素基多孔相变复合材料研究
Mn-Si对ZG1Cr11Ni2WMoV钢力学性能的影响
民机复合材料的适航鉴定
复合材料无损检测探讨
MG—MUF包覆阻燃EPS泡沫及力学性能研究
INCONEL625+X65复合管的焊接组织与力学性能
TiO2/ACF复合材料的制备及表征