APP下载

一种高性能环氧树脂界面剂的合成及性能研究

2018-09-10朱冬楠田金涛关国庆侯亚峰

河南科技 2018年19期

朱冬楠 田金涛 关国庆 侯亚峰

摘 要:通过研究进口界面剂对环氧树脂固化物与金属嵌件界面性能的影响,开发出新型环氧树脂界面剂,并对其热老化性能及力学性能进行研究。结果表明:该新型环氧树脂界面剂处理过的拉伸试棒强度达到45MPa,且高温老化后性能衰变小,180℃高温老化试验后的拉伸强度仍然超过35MPa。

关键词:环氧树脂;界面剂;高耐热;高强度

中图分类号:TQ630.4 文献标识码:A 文章编号:1003-5168(2018)19-0070-03

Study on Synthesis and Performance of a High Performance

Epoxy Resin Interface Agent

ZHU Dongnan TIAN Jintao GUAN Guoqing HOU Yafeng

(Henan Pinggao Electric Limited Company ,Pingdingshan Henan 467001)

Abstract: A new type of epoxy resin interface agent was developed by studying the influence of the interface agent on the interfacial properties of the epoxy resin solidified and the metal inlay, and the thermal aging and mechanical properties of the epoxy resin were studied. The results showed that the tensile strength of the new epoxy resin interfacial agent was 45MPa, and the performance decay was small after high temperature aging, and the tensile strength of the new epoxy resin after aging at 180℃ was still more than 35MPa.

Keywords: epoxy resin;interface agent; high heat resistance; high strength

高压开关设备中的绝缘子通常带有金属嵌件,其生产过程是在模具中预先装入金属嵌件,浇入树脂物料,固化结束后,浇注件的金属嵌件和环氧树脂物料紧密粘接在一起。由于环氧树脂物料和嵌件金属的性能参数不同,其界面处会产生应力集中、容易造成剥离等缺陷[1]。因此,在浇注前,必须对金属嵌件进行表面处理,增强与树脂的粘接强度。在环氧树脂浇注生产中,提高金属嵌件与环氧树脂的粘接强度是普遍性的工艺难题。

目前,嵌件与环氧树脂的界面处理最好的方法是涂覆界面剂,而性能好的界面剂全部依赖于进口。本文通过对自主研发的国产界面剂MA6304工艺进行优化,成功替代了进口界面剂,摆脱了关键工艺、材料受制于人的困境。

1 工艺方案

1.1 原材料

试验用原材料见表1。

1.2 試验方法及过程

1.2.1 界面剂配方。试验用的界面剂配方见表2。

1.2.2 界面剂的粘接机理。酚醛缩硅酮树脂与AFG-80氨基四官能团环氧树脂发生反应后可生成与金属附着力高的化合物,而2-乙基-4-甲基咪唑则作为两者反应的促进剂。……

登录APP查看全文