考虑退化状态的功率器件寿命预测研究
2017-07-25姚芳王少杰李志刚
姚芳+王少杰+李志刚



摘 要: 功率变流器是风机系统的核心组件,其可靠性直接影响风电系统的可靠性。风电变流器中主要的失效部件是IGBT模块,因此对IGBT模块进行寿命预测可以提高整个风电系统的可靠性。首先讨论变流器电热耦合模型中的退化参数,然后基于LESIT寿命预测模型和雨流循环计数法提出考虑IGBT模块退化状态的寿命预测方法。文中以1.2 MW风力发电系统为例,预测了网侧风电变流器中IGBT模块的寿命,并对比分析了是否考虑模块的退化状态对寿命预测结果的影响。
关键词: 寿命预测; 退化状态; 电热耦合模型; IGBT
中图分类号: TN626?34; TM46 文献标识码: A 文章编号: 1004?373X(2017)14?0132?04
Abstract: Power converter is a crucial component of the wind turbine generator system, and its reliability influence the reliability of the wind power system directly. The IGBT module is the main possible failure part in the wind power converters, so predicting the lifetime of IGBT can improve the reliability of the entire wind power system. The degradation parameters of the converter electro?thermal model are discussed. The lifetime prediction method considering the degradation state of IGBT is proposed based on the LESIT model and rain?flow cycle counting method. A 1.2 MW wind energy conversion system is taken as a study example, the lifetime of IGBT module in grid side converter is predicted, and the two lifetime prediction results which considers and does not consider the degradation state are compared.
Keywords: lifetime prediction; degradation state; electro?thermal model; IGBT
0 引 言
近年来,风力发电技术有了飞速发展,世界风电装机容量不断上升,对整个电网的影响也随之增大,为了提高电网整体的可靠性,迫切需要提高风力发电系统的可靠性。1993—2004年的一项风电系统故障率的统计结果显示,风电变流器作为风力发电系统的核心组件,是主要失效组件之一[1?2]。
风电变流器中最主要的失效部件是其应用的功率半导体器件IGBT[3]。提高风电变流器的可靠性,需要开展IGBT模块的寿命预测研究,若能在其失效前及时更换,可以降低维修成本及故障损失。
目前,依据功率器件的结温来进行寿命预测研究是一种常用的方法,由于功率器件的封装特性,结温难以实时测量,因此需要首先计算器件的结温数据。文献[4?7]利用LUT解耦了器件与系统之间的仿真,搭建了能够快速仿真的电热耦合模型,可以得到长时间尺度的结温数据。……
