变压吸附制氧系统节能与环保的应用研究
2017-05-08周军
周军



摘 要:变压吸附式空气分离制氧技术(简称:PSA制氧)是当今小产量氧气制取的主要方法。但是它却把携带有能量、冷量、并已净化的富氮气体作为废气排到大气中,既浪费了资源,又打破空气中成分平衡。针对这一种弊病我们研制出了组合式空分制氧-制氮系统。文章就这一系统的原理、效果及其社会效应进行分析与阐述。
关键词:PSA制氧氮;分子筛;节能;环保
Abstract: Pressure swing adsorption air separation Oxygen production technology (referred to as: PSA oxygen) is the main method of production of low-yield oxygen. It is to carry the energy, cooling, and purification of nitrogen-rich gas as exhaust to the atmosphere, both a waste of resources, but also break the balance of the composition of the air. In view of this kind of malpractice, we have developed a combined space-divided oxygen-nitrogen system. This paper analyzes and expounds the principle, effect and social effect of this system.
Keywords: Oxygen and nitrogen;Molecular sieves;Energy saving;Environmental protection
1 概述
氧气是医院正常运转的一个基本要素,在国民经济的发展中也发挥着重要作用,空分制氧是利用不同压力下分子筛对氧、氮分子吸附能力的差异,将氧气从空气中分离出来,属于物理式空分过程,也称 (pressure swing adsorption 缩写PSA)变压吸附制氧,是迄今为止世界上最先进而又简便的制氧方法,又因为是以取之不尽的空气为原料,所以在我国二甲以上的医院已普遍应用。
然而这种工艺只能分离出空气中7.6%的氧气,剩下约92%空气经过压缩、冷干、净化后的以氮、氧为主的混合气体则被作为“废气”又不间断地排回到了大气中,不仅导致了资源的浪费,而且这些废气中氮气的占比高达85.7%,导致了医院或气体分离厂周围空气组份的局部失衡、氮气的严重超标等环境问题。正常空气和废气成分的对比,见图1、图2。针对这些弊病,我们研制了变压吸附空气分离制氧——制氮组合系统(简称:组合式空分制氧-制氮系统),如图5所示。
2 传统的PSA制氧系统的弊病
2.1 能源与资源的浪费
传统的PSA制氧、制氮(简称:PSA制氮)系统见图3、图4,根……
