APP下载

锻压机床床身结构拓扑与尺寸的协同优化综述

2016-01-20何彬

湖北理工学院学报 2015年5期

何 彬

(湖北理工学院 机电工程学院,湖北 黄石 435003)

锻压机床床身结构拓扑与尺寸的协同优化综述

何彬

(湖北理工学院 机电工程学院,湖北 黄石 435003)

摘要:针对锻压机床床身的制造过程和结构特点,围绕床身铸件铸造过程温度场、应力场的分析与计算,铸造热应力拓扑优化模型和设计准则的建立,锻压机床床身结构拓扑与尺寸协同优化算法的建立等方面展开研究和阐述,综合考虑床身铸造过程热应力、温差和热变形的影响,实现锻压机床床身结构拓扑与尺寸的协同优化过程。

关键词:锻压机床;床身;铸造;拓扑优化;协同优化

收稿日期:2015-08-06

基金项目:湖北省自然科学基金项目(项目编号:2012FFC016)。

作者简介:何彬(1970—),男,副教授,博士,研究方向:优化设计、机床技术。

doi:10.3969/j.issn.2095-4565.2015.05.002

中图分类号:TH122

文献标识码:A

文章编号:号:2095-4565(2015)05-0006-04

Abstract:Aiming at the manufacturing process and structure features of forging machine bed,this paper researches and reviews on such aspects as the analysis and calculation of temperature and stress field of the bed in the casting process,the establishment of topology optimization and design principle under casting thermal stress,the algorithm of collaborative optimization of structure topology and size for forging machine bed and so on.The influence of thermal stress,difference in temperature and thermal deformation are taken into comphrensive consideration during the casting process on the bed to realize the process of collaborative optimization.

Summarization on Collaborative Optimization of Structure Topology and Size for Forging Machine Bed

HeBin

(School of Mechanical and Electrical Engineering,Hubei Polytechnic University,Huangshi Hubei 435003)

Key words:forging machine;bed;forging;topology optimization;collaborative optimization

0引言

锻压机床轻量化是绿色设计与制造的必然发展趋势,在锻压机床的各个组成部分中,床身等支承件的重量要占总重量的20%~30%[1],锻压机床轻量化首先必须要实现床身的轻量化。现有研究中,锻压机床床身主要是通过结构优化来实现轻量化设计,即基于机床的静力特性(刚度)、动力特性(频率)和热特性(传热、散热性能)等建立优化模型和准则,并通过有限元软件实现优化过程,很少考虑床身铸造过程热应力、温差和热变形对床身结构和性能的影响[1-5]。实际上,锻压机床床身通常为铸件,床身的各种机械和物理性能(如整机质量、寿命、精度保持等)主要取决于床身的铸造过程。……

登录APP查看全文