FFT变换在陶瓷刚玉砂轮声学特性研究中的应用
2016-01-20刘芳,焦金旭,李二洋等
FFT变换在陶瓷刚玉砂轮声学特性研究中的应用
刘芳, 焦金旭, 李二洋, 范文捷
(中原工学院, 郑州 450007)
摘要:FFT是离散傅立叶变换的快速算法,本文利用MATLAB将FFT应用于敲击不同刚玉磨料陶瓷砂轮发出的声学特性的研究中,将时域上很难看出特征的声学信号变换成频域信号,发现不同刚玉磨料陶瓷砂轮声学特征区别明显。通过对比不同的采样点的频幅图,选取最佳采样点。绘制两种刚玉磨料砂轮的频幅图和相位图,提取特征参数。结果表明,FFT能将不同刚玉陶瓷砂轮声学特性信号的频谱提取出来,为深入研究陶瓷材料基于声学原理的性能表征提供了思路;刚玉中Al2O3含量与声波的特征参数有极高的相关性。
关键词:快速傅里叶变换; 刚玉磨料; 相关性
中图分类号:TG73
文献标志码:A
DOI:10.3969/j.issn.1671-6906.2015.03.014
Abstract:FFT is a fast algorithm of discrete Fourier transform. This paper studies the acoustic characteristics by using MATLAB applying on FFT knocking at different corundum abrasive ceramic grinding wheel. It is found that the different obvious acoustic characteristics of alumina ceramic wheel, by making the characteristics of acoustic signal which can not be observed in the time domain transforming to the frequency domain signal. Through the comparison of different sample point amplitude frequency diagram, selecting the best sampling points, the feature parameters are extracted by drawing two corundum abrasive ceramic wheel frequency image and phase diagram. The results show that the FFT can extract the spectrum signal of acoustic characteristics from different corundum ceramic grinding wheel and this way provides a method for further research on ceramic materials performance characterization based on acoustic principle; It has high correlation of Al2O3 content in alumina and the characteristics of the acoustic parameters.
收稿日期:2014-12-25
作者简介:黎韩琪(1989-),女,河南淅川人,硕士生。
文章编号:1671-6906(2015)03-0064-04
陶瓷刚玉砂轮是机械加工中重要的磨削工具,它由磨料、结合剂、气孔三部分组成,是非均质材料。陶瓷砂轮的常规检测有:基本尺寸、形位公差、外观缺陷、回转强度、硬度、静平衡、动平衡、组织等[1]。但是这些常规的检测不能完整地表达陶瓷砂轮产品的各种性能。
声学用于检测物质性能的研究已经广泛开展[2-5]。2007年杨丽用声学特性来表示小麦品质指标[2];2011年李齐超等利用小波变换分析声波,探讨声学特性与小麦硬度的相关性[3];2010年林颢等利用声学特性检测鸡蛋蛋壳的裂纹[4]。用声学检测物质性能时,对物质没有任何损坏,属于无损检测的一种。……
