RC Z形柱框架节点拟静力试验有限元分析
2016-01-19崔钦淑郭颜恺
崔钦淑,郭颜恺
(浙江工业大学 建筑工程学院,浙江 杭州 310014)
RC Z形柱框架节点拟静力试验有限元分析
崔钦淑,郭颜恺
(浙江工业大学 建筑工程学院,浙江 杭州 310014)
摘要:基于钢筋混凝土Z形截面柱框架节点低周反复加载试验结果,运用有限元软件ANSYS14.5对其进行非线性模拟.针对Z形柱框架节点本身形状相对规整且内部配筋构造相对复杂的实际情况,根据配筋的实际位置,采用直接生成建模方式建模.利用不同ANSYS的弹塑性材料MKIN模型及MISO模型与不同的混凝土的本构关系Hongnestad模型、Rush模型、Sargin模型进行组合来分别模拟混凝土的材料特性,以研究不同的钢筋混凝土材料模型对模拟结果的影响.研究表明:MKIN+Sargin的组合模拟结果与试验结果吻合较好,此外不同的收敛精度控制对模拟结果也有一定的影响.
关键词:钢筋混凝土Z形柱;框架节点;ANSYS;本构关系;材料模型
Finite element analysis of quasi-static test of Z-shaped column
joints of RC frames
CUI Qinshu, GUO Yankai
(College of Civil Engineering and Architecture, Zhejiang University of Technology, Hangzhou 310014, China)
Abstract:Based on the test results of the Z-shaped column joints of RC frames subjected to low cycle repeated loading, the nonlinear modeling is conducted with ANASYS14.5 software. Since the Z-shaped column joint of frames has a relatively regular shape but comparatively complicated internal reinforcements, the computational model is directly built according to the actual locations of steel bars. The material properties of concrete are modeled using the elasto-plastic MKIN and MISO models with the Hongnestad, Rush, and Sargin constitutive relationships provided by ANASYS to study the effect of different models of RC on the numerical results. It is shown that the numerical results given by the elasto-plastic MKIN model with the Sargin constitutive relationship are in good agreement with the test results. In addition, the control of accuracy and convergence has a certain influence on the numerical results.
Key words:RC Z-shaped column; frame joint; ANSYS; constitutive relationship; material model
随着计算机技术的迅速发展,利用计算机有限元计算模拟逐渐成为科研的一种有效手段,而且可以有效节约试验材料用量.ANSYS是目前应用较为广泛的有限元模拟软件,在建筑工程领域也有较为广泛的应用.然而钢筋混凝土结构,由于混凝土材料的特殊性,使其力学性能较为复杂,给现实有限元模拟研究也带来了极大的困难性,往往混凝土材料的准确模拟决定了其结果的准确性.国内、外有较多研究者做过相关方面的有限元模拟[1-4],但并未系统的研究不同的混凝土本构与材料模型组合对试验结果的……
