APP下载

冲击载荷下圆环压缩变形特性研究

2016-01-15徐松林易洪昇

振动与冲击 2015年11期

杨 茨,徐松林,易洪昇

(中国科学技术大学中国科学院材料力学行为与设计重点实验室,合肥 230027)

第一作者杨茨男,硕士,1987年生

冲击载荷下圆环压缩变形特性研究

杨茨,徐松林,易洪昇

(中国科学技术大学中国科学院材料力学行为与设计重点实验室,合肥230027)

摘要:基于Johnson-Cook材料模型,应用数值模拟的方法,研究了圆环件在冲击载荷作用下的压缩变形规律。得到了冲击载荷下的摩擦系数-变形特性曲线,由此研究了不同载荷幅值(加载速度)、不同应变率敏感系数下的圆环内径变化规律以及对临界摩擦系数的影响。结果表明:摩擦系数-变形特性曲线和准静态结果基本趋势一致但有较大的差异,其中惯性效应起主要作用,应变率效应则起着次要作用。另外,此过程存在着临界摩擦系数,而应变率效应和惯性效应对圆环的临界摩擦系数影响不大,因此,临界摩擦系数可以作为试件的内在属性,应用于圆环的冲击锻压工程。

关键词:冲击动力学; Hopkinson压杆(SHPB); 圆环压缩; 动态摩擦; 应变率效应; 惯性效应

基金项目:国家自然科学基金(11272304)资助

收稿日期:2013-04-18修改稿收到日期:2014-05-16

通信作者徐松林男,博士,副教授,1971年生

中图分类号:O347

文献标志码:A

DOI:10.13465/j.cnki.jvs.2015.11.023

Abstract:Based on Johnson-Cook material model, the deformation properties of a metal ring under impact loading were numerically analyzed. The friction calibration curves under impact load were obtained and compared with the quasi-static results. The effects of different loading speeds and different strain rate sensitivity coefficients on calibration curves and critical friction coefficient. The calculation results showed that the calibration curves under impact load have similar tendencies but obvious differences in quantity compared with the quasi-static results; both strain rate effect and inertia effect have influences on calibration curves during a ring specimen subjected to impact loading; the inertia effect plays a major role, and the influence of the strain rate effect is not very obvious; furthermore, there is a critical friction coefficient during the ring compression and it can be considered as an intrinsic property of a metal ring, it keeps a constant under different conditions.

Deformation properties of a ring under impact loading

YANGCi,XUSong-lin,YIHong-sheng(CAS Key Laboratory of Mechanical Behaviour and Design of Materials, University of Science and Technology of China, Hefei 230027, China)

Key words:impact; SHPB; ring compression; dynamic friction; strain rate effect; inertia effect

对圆环件压缩变形特性的研究最初起源于金属加工工业。圆环纵向压缩时, 随着界面摩擦系数的不同,存在着两种变形模式:当摩擦系数较小时,压缩后内径扩大,内圆柱呈凹状;当摩擦系数较大时,压缩后内径缩小,内圆柱呈凸状。利用这一特性,常用圆环压缩实验来简单测量压板和试件端面之间的摩擦系数。……

登录APP查看全文