第一作者代士超男，硕士，1989年生

通信作者郭瑜男，博士,教授，博士生导师，1971年12月生

基于子频带谱峭度平均的快速谱峭度图算法改进

代士超，郭瑜，伍星，那靖

(昆明理工大学机电工程学院，昆明650500)

摘要：快速谱峭度图(Fast Kurtogram)算法具有能自适应选取共振解调频带并实现包络解调提取的优点，在滚动轴承包络分析中有广阔的应用前景，但其在实际应用中，若被采集信号中包含有较高峰值的脉冲干扰时，将可能导致谱峭度图的自适应共振带确定失效，最终导致无法获得包含有效滚动轴承的故障特征信息的包络信号。为解决快速谱峭度图算法的上述不稳定问题，本文提出了一种基于子频带谱峭度平均的改进快速谱峭度图算法，其可有效消除或削弱脉冲干扰成分对谱峭度图结果的影响，提高了共振解调频带确定的鲁棒性，实现了基于快速谱峭度图算法的滚动轴承故障特征准确提取。仿真和试验结果验证了本方法的有效性。

关键词：谱峭度，快速谱峭度图算法，包络分析，谱峭度平均

基金项目：国家自然科学基金资助项目(51365023)

收稿日期：2013-12-19

中图分类号:TH133.33

文献标志码：A

DOI:10.13465/j.cnki.jvs.2015.07.016

Abstract:The fast kurtogram algorithm has the advantages of choosing resonance demodulation frequency band adaptively and being able to realize the envelope demodulation extraction, so, it has broad application prospect in the rolling bearing envelope analysis. But in the fast kurtogram calculation, the existense of a high peak pulse interference in the vibration signal may result in that, the fast kurtogram calculation fails to determine the adaptive resonance frequency band, eventually the envelope may not be effectively extracted and used as the rolling bearing fault characteristic information. In order to solve the instability problem of fast kurtogram algorithm, an improvement fast kurtogram algorithm based on the average of sub-band spectral kurtosis was presented. The method can effectively eliminate or weaken the influence of pulse interference on the result of fast kurtogram, improve the robustness of the algorithm and make better the stability of the frequency band selection for resonant demodulation. The method proposed can extract the rolling bearing fault feature accurately. The simulation and experimental results veried its effectiveness.

Improvement on fast kurtogram algorithm based on sub-frequency-band spectral kurtosis average

DAIShi-chao,GUOYu,WUXing,NAJing(Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming 650500, China)

Key words:spectral kurtosis; fast kurtogram; envelope analysis; spectral kurtosis on average

包络分析(又称为共振解调分析)是目前被广泛应用的滚动轴承初期故障特征提取技术之一。包络分析的关键在于确定合适的共振解调频带参数(滤波中心频率和带宽)。近来提出的基于谱峭度的包络分析方法[1]，能够根据谱峭度值自适应地获取优化的滤波中心频率和带宽，并实现对故障特征的有效提取，其已被证明是一个非常有效的滚动轴承故障包络分析方法[2]。……