油田应用三元液胶团产生因素室内研究
2015-10-21朱秀娟党庆功贾洪跃张宏王晶姜海瑞
朱秀娟 党庆功 贾洪跃 张宏 王晶 姜海瑞



摘 要:三元复合驱油技术是近几年发展起来的一种新的提高采收率的方法,在三元注入井停注后产生了胶团,为了探索其注入胶团产生的原因,分别对的温度、溶剂、容器以及搅拌时间等因素进行实验研究,在10 d内分别进行对比实验,得出了胶团产生的影响因素。其中,水质是胶团产生的主要原因,而容器对胶团的量具有重要影响,温度加快了胶团的产生。
关 键 词:三元液;胶团;絮状物
中图分类号:TE 357 文献标识码: A 文章编号: 1671-0460(2015)06-1263-03
Laboratory Study on Factors of Producing the
Micelle in Ternary Liquid for Oilfield Production
ZHU Xiu-juan1,DANG Qing-gong1,JIA Hong-yue2,ZHANG Hong3,WANG Jing1,JIANG Hai-rui1
(1.Northeast Petroleum University, Heilongjiang Daqing 163318,China;
2. Daqing Oilfield Company No.4 Oil Production Plant, Heilongjiang Daqing 163511,China;
3. Daqing Oilfield Company No.3 Oil Production Plant, Heilongjiang Daqing 163113,China)
Abstract: ASP flooding technology is a new EOR methods developed in recent years. After stopping injecting the ternary liquid to the injection wells, micelles always appear. In order to explore the reasons to form the micelles,effect of temperature, solvent, vessel, stirring time and other factors were studied. Comparative experiments were carried out within 10 days; the factors of producing the micelles were obtained. The results show that water quality is the main reason to affect the micelles formation, and the container has a significant impact on the amount of micelles, the temperature rising can accelerate generation of the micelles.
Key words: Ternary liquid; Micelles; Floccules
三元复合驱是指在注入水中加入碱(A)、低浓度的表面活性剂(S)和聚合物(P)的复合体系驱油的一种提高原油采收率的方法,简称ASP。 三元复合驱油井在应用三元液一段时间后停注,井内产生絮状胶团,使得井内压力升高,当泥浆柱的静液柱压力超过地层破裂压力时,会引起井漏。严重的井漏会导致井内压力下降,影响正常钻井、引起井壁失稳、诱发地层流体涌入井筒并井喷,会对生产安全造成重大影响。为了防止对油田生产造成严重的影响,必须控制井内絮状胶团的产生。因此明确絮状胶团的影响因素是具有重要的现实意义的。本文针对该问题设计了一系列的室内实验,对可能产生该现象的因素分别进行对比观察实验,从而找出问题的根源[1,2]。
1 实验设备及材料
(1)实验设备:高速搅拌机,布氏粘度计,恒温箱
(2)实验药品:聚丙烯酰胺(分子量2 500万);碱液(现场);表活剂溶液(现场);配液水(现场);蒸馏水(实验室自制)。……
