结合工程实例探讨露天矿山中深孔爆破对边坡稳定性的影响
2012-04-23傅文英
傅文英
摘要:露天矿山安全生产中边坡的稳定性是一项重要的技术,一直以来不乏国内外众多学者对其进行研究和探讨。为了分析露天矿山中深孔爆破对边坡稳定性影响机理,结合某小型露天矿山工程实际,在确定炸药及爆破孔网参数的基础上,引入降振技术并运用LS-DYNA有限元分析程序对中深孔爆破边坡影响情况进行数值模拟试验,得出了有指导意义的结论。
关键词:边坡稳定;中深孔爆破;露天矿山;LS-DYNA
Abstract: Open pit mine production safety of slope stability is an important technology, there are many foreign and domestic scholars to study and explore. In order to analyze the open-pit mine blasting on slope stability influence mechanism, combined with a small open pit mine engineering practice, in the setting of explosive and blasting hole net parameter on the basis of introducing technology, reducing vibration and finite element analysis software LS-DYNA was used on the deep hole blasting in slope condition of numerical simulation, obtained some useful conclusions.
Key words : slope; deep-hole blasting in open pit mine; LS-DYNA;
中图分类号:TD23 献标识码: A 文章编号:2095-2104(2012)11-0020-02
1工程概况
本文以某露天小型金属矿山为依托,对其中深孔爆破边坡稳定性影响情况进行试验研究。
1.1工程地质
该矿区构造简单,矿体呈层状~似层状产出,矿体赋存标高880m~925.0m,矿床属沉积热液叠加改造的矽卡岩型磁铁矿床。矿区主要岩性属于硬岩~相当硬岩类矽卡岩,硬度系数为8.2~13.8,为难爆~极难爆岩体。上部矿体赋存较浅,采用中深孔爆破开采。由于该矿区岩体裂隙较为发育,因此进行中深孔爆破后露天边坡的稳定性成为了工程重点监控对象。
1.2爆破参数
在该矿山以往爆破计算经验的基础上,借鉴国内其他露天矿山爆破参数,并同时引入微差爆破和预裂缝降振技术。本次设计爆破两排中深孔共32个,孔间距2.0m,排间距2.3m,平均单孔孔深15.5m,孔径110mm,采用磁电雷管、毫秒雷管、导爆管联合起爆。选用密度为0.76g/cm3、爆轰速度为3400m/s粉状乳化炸药,主爆孔采用耦合装药,预裂孔采用不耦合装药,导向孔不装药。预裂孔最先起爆,主爆孔分段起爆,预裂孔与主爆孔起爆时间间隔不少于150ms,保证预裂成缝。……
