暗挖地铁车站钢管柱安装施工技术
2012-04-10郑冬冬史立杰
郑冬冬 史立杰
摘要:本文着重介绍了暗挖逆作法地铁车站主体结构钢管混凝土柱地面施工的方法。包括成孔、护壁、定位器安装、钢管柱安装、钢管柱内混凝土浇筑等环节的施工方法,以及在施工过程中不断摸索总结改进的重点环节施工经验。
关键词:地铁施工 暗挖法 钢管柱安装
Abstract: this paper introduces the main structure underground subway station top down concrete filled steel tube column the construction method of the ground. Including into hole, protecting wall, the locator installation, steel tube column installation, steel tube column concrete casting, etc., the construction method of link, and in construction process continuously grope for summary of improvement part of the construction experience.
Key words: the subway construction type of steel tube column installation method
中图分类号:TU74文献标识码:A文章编号:
1 工程概况
南京地铁南京南站为地下两层岛侧式站台车站,主体结构采用钢筋混凝土箱体框架结构,车站长252.4m,标准段宽度47.2m,车站基坑开挖深度约为14.3m~15.6m。车站采用暗挖逆作法施工,车站共设102根钢管混凝土柱,钢管混凝土柱作为施工过程的中间支撑柱,在车站底板结构尚未封闭时,承受地下各层已施作完毕的框架结构自重和各种施工荷载,顶板封闭后,中间柱作为车站主要竖向承载和传力结构。
钢管混凝土柱基础深度分别为9m和17m,直径为1.5米,采用C35钢筋混凝土。钢管柱长度约16m,直径800mm,壁厚20mm,共102个,锚入桩基础深2m。钢管柱心填充C50补偿收缩混凝土,与顶板、中板和底板相接位置设置钢牛腿。
该区段近地表主要分布可-硬塑的粉质粘土或粘土,底部主要为风化的泥质粉砂岩和粉砂质泥岩,地形较平坦,工程地质性能良好。
2 施工方案
根据现场地质图以及现场实际地质情况,在粉质粘土层较厚范围钢管柱有效部位采用人工挖孔桩+桩基础采用旋挖钻机成孔;粉质粘土层浅,砂岩层厚的范围可以采用机械成孔+长大钢护筒护壁的施工方法。……
