大体积混凝土结构裂缝控制措施
2012-03-23刘才秀
刘才秀
摘要:在现代建筑中,大体积混凝土的工程规模日趋扩大,为确保大体积砼施工质量,除满足强度等级、抗渗要求外,关键要严格控制混凝土在硬化过程中引起的内外温差,防止因温度应力而造成混凝土产生裂缝。本文结合工程实践和科研成果,分析了温度裂缝产生的原因,提出了大体积混凝土结构防止产生裂缝的措施
关键字:大体积混凝土裂缝控制
Abstract: in modern architecture, of mass concrete project scale and the increasing to ensure that mass concrete construction quality, in addition to meeting anti-permeability strength grade, the requirements, and the key to strictly control the concrete in sclerotic process of temperature difference between internal and external cause, due to the temperature stress and cause concrete cracks. Combined with the engineering practice and scientific research, analyzes the causes of the temperature cracks, and put forward the mass concrete structure prevent crack measures
Key word: mass concrete crack control
中圖分类号: TV544+.91 文献标识码:A 文章编号:
一、概述
我国《混凝土结构工程施工及验收规范》认为,建筑物的基础最小边尺寸在1~3m范围内就属大体积混凝土。
大体积混凝土结构的截面尺寸较大,裂缝一般在混凝土浇注短期内形成,此时设计荷载尚未作用于结构上,因此由外荷载引起裂缝的可能性很小。但由于水泥的水化作用是放热反应,大体积混凝土自身又具有一定的保温性能,因此其内部温升幅度较其表层的温升幅度要大得多,而在混凝土升温峰值过后的降温过程中,内部降温速度又比其表层慢得多,在这些过程中,混凝土各部分的温度变形及由于其相互约束及外界约束的作用而在混凝土内产生的温度应力,是相当复杂的。一旦温度应力超过混凝土所能承受的拉力极限值时,混凝土就会出现裂缝。
大体积混凝土结构的施工技术和施工组织都较复杂,施工时应十分慎重,否则易出现质量事故,造成不必要的损失。组织大体积混凝土结构施工,在模板、钢筋和混凝土工程方面有许多技术问题要逐个解决。……
