多肉植物移栽机末端执行器优化设计与试验
2025-08-16叶海平郑志坚杨坤全
中图分类号:S223.99 文献标识码:A 文章编号:2095-5553(2025)08-0014-08
Abstract:Aiming at the problems of loweficiency,highcost and low succesrate of succulent plant transplants,a dynamicadjustableendefectorforplant spacing wasdesigned.Basedonthe transplanting processofsucculent plants,the overall structureof the sedlingend effector was determined,andthekeycomponents weredevelopedand designed.The fuzzy PID control was applied toadjust the spacing of the sedling fingers for improving the positioning accuracy of the seedling fingers.Thesuessrateofseedling harvesting and theintegrityof theseedling bowl were takenasexperimental indicators,theworking air pressure,substrate moisture contentand'sedling harvesting frequencywere takenas experimental factors,a transplanting experimental platform was established for suculent plant automatic transplants,and the orthogonal testof thining and transplanting was carredout.Theexperimental results showed thatthe frequency of picking seedlings was 61 plants/min,the working pressure was 0.22MPa ,and the substrate moisture content was 58% : The success rate of picking and feeding seedlings was 94.41% ,and the substrate integrity rate was 93.66% .The end effector of seedlings can effectively complete the picking and feeding operation.
Keywords:succulent plants;end efector;seedling picking and feding device;transplanting equipment;fuzzy PIDcontrol
0 引言
在工作效率低、劳动强度大和成本高等问题,严重阻碍了多肉植物产业的发展。因此,开展多肉植物全自动移栽机的研究意义重大[1]。
穴盘移栽作业是多肉植物种植的重要环节。多肉植物的移栽作业主要以人工或半自动化设备为主,存在整个移栽流程中,末端执行器作为移栽机的执行装置,是自动移栽机的关键部件[2]。国内外针对自动移栽机和末端执行器开展了大量研究[3.4]。欧美发达国家的钵苗自动移栽设备技术较为成熟,研制出适合本国农业的全自动移栽机及末端执行器,并投入农业生产[5.6]。国内学者针对自动移栽机和末端执行器也开展了大量研究工作[7.8]。童俊华等[9]针对针式末端执行器夹持移栽后穴孔内基质残留较多的问题,设计了一种指铲式末端执行器,通过增大指铲与苗钵基质的接触面积,可剔除穴孔内大部分基质。崔永杰等1°针对疏植移栽环节中可调株距设备自动化程度低、人工作业效率低下、易损苗伤苗等问题,设计了一种基于圆柱凸轮的株距可调式取苗末端执行器,移栽成功率为93.33% ,整机移栽效率为22株/min,满足不同穴盘规格疏植作业。韩豹等[11]针对现有甘蓝取苗末端执行器存在取苗针间距固定、灵活性差、适用范围窄等问题,设计了一种插入针间距可调的针式取苗末端执行器,通过调整调节滑块和针座在支架上的位置,实现取苗针间距的调整。查阅国内外相关的文献资料,未发现针对多肉植物移栽机末端执行器的研究成果和专利。……
