APP下载

螺栓布置对钢-木组合梁弯曲性能的影响试验研究

2025-08-11吴珍珍唐盛华刘瑞越

土木建筑与环境工程 2025年4期
关键词:交界面木板挠度

中图分类号:TU375.4 文献标志码:A 文章编号:2096-6717(2025)04-0109-12

Experimental study on influence of bolt arrangement on bending behaviorofsteel-wood compositebeam

Abstract: In order to promote the application of bolt fasteners with diameters of up to 10mm in steel-wood composite structures,the efects of the number of transverse rows of bolts,bolt diameters and longitudinal spacing of bolts on the bending performance of steel-wood composite beams were investigated.By designing a composite beam with a I-steel beam at the lower part and wooden board at the upper part,the upper and lower parts connected by bolts.A three-point bending load test was caried out on 8 test beams,to observe the failure mode,mid-span deflection variation,mid-span section strain and slip efect at the steel-wood intersection at the end of the beam respectively,to investigate the effect of diferent bolt parameters on the flexural mechanical properties of the steel-wood composite beam.The test results showed that the main damage mode of the steelwood combination beam is the mid-span deflection up to 1/27 of the calculated span,resulting in deformation damage; Composite beams had high flexural capacity and ductility coefficient.The maximum relative slip at the steel-wood interface of each specimen was 2⋅6mm ; Among the parameters of bolt arrangement, the longitudinal spacing of bolts had greater influence on the strain diference at the steel-wood interface in the span of the composite beam,while the bolt diameter had less influence.The concept of bolt area ratio of steel-wood composite beam was proposed,i.e.the ratio of total bolt area to compressive area of wood board. With the increase of the bolt area ratio,theflexural load capacity of the specimen increases significantly and the maximum slip at the intersection decreases gradually,although the displacement ductility coeficient decreases.The range of bolt could be quickly calculated by optimum the reasonable range of bolt area ratio,which provides design reference for practical application of such steel-wood composite beam.

Keywords: steel-wood composite beam;bolt connection;; interfacial slip; flexural bearing capacity;bolt area ratic

钢材是一种轻质、高强且可回收材料,能显著提高结构的强度和韧(塑)性。木材是一种天然的可再生材料,相较于钢材,尽管存在刚度低、强度退化、易出现裂缝等力学性能缺陷,但在抗震、节能保温2等方面有较大优势。近十年来,广泛的数值分析和试验研究证实了木材在工程建筑中的优越性,同时,钢-木组合柱、钢-木组合梁等钢-木组合构件的结构性能也受到了广泛关注。褚云朋等[3、Hu等4及Xu等5对钢-木组合柱进行了试验,研究了钢-木组合柱承载力的影响因素。刘朋等提出了一种木方外包在十字钢骨周围的组合柱形式,对其进行了轴心受压试验及有限元分析,研究表明,组合柱主要由钢骨承受轴压力,钢骨周围的木块可对钢材提供一定的屈曲约束,钢材厚度是影响组合柱承载力的主要因素。Bradford等[7]、Li等[8]和Jasienko等[9]设计了冷弯薄壁型钢或热轧钢与木材制成的组合梁,对其抗弯性能进行了试验研究。Pan等[]运用有限元软件建立了1组钢悬臂梁和3组钢木悬臂梁模型,并比较分析了其承载能力和延性。张也等[1]对以钢材代替工字木梁腹板部分的钢-木组合梁进行了三点弯曲试验,结果表明,钢-木组合梁的抗弯刚度比相同截面尺寸的矩形木梁高 201% 。Duan等[12]对3根落叶松木粘合在热轧H型钢腹板两侧的组合梁和1根纯钢梁进行了弯曲承载力试验,结果表明,H型钢-落叶松组合梁整体性能良好,在钢梁腹板两侧粘接木板可以提高承载力,构件形式合理有效。……

登录APP查看全文

猜你喜欢

交界面木板挠度
开心地笑了
H型钢柱撞击全过程力学性能分析与损伤评估
小店高架桥健康监测系统设计
徒手劈木板的奥秘
高中物理力学问题中板块模型的分析
透平试验件对试验台横振阻尼临界转速的影响
木板年画