APP下载

基于boost效应的XRAM电路研究

2025-08-07姜松蔡萌萌饶俊峰

上海理工大学学报 2025年3期
关键词:电感磁场储能

中图分类号:TN782 文献标志码:A

Research on XRAM circuit based on boost effect

JIANG Song1, CAI Mengmeng1,RAO Junfeng² (1.SchooofechanicalEngineering,Universityofanghaiforcienceandechnologyhanghaio3,China;2.uzou Institute of Biomedical Engineering and Technology, Chinese Academy of Sciences,Suzhou 215l63,China)

Abstract: Inductive energy storage pulse power supply has a wide range of applications in the field of pulsed magnetic field, in which the XRAM circuit utilizing multi-stage inductors in series charging and parallel discharging is more expandable. An XRAM circuit using MOSFET switches and capacitor boost effect to increase the current magnitude was proposed. The structure was simple and easy for modular design. The circuit could generate high-current pulses and pulsed magnetic fields without a high-voltage DC source. Based on the topology, two two-stage XRAM circuits in paralll are constructed, which can generate 0~150A pulse current with frequency of 10~100Hz and pulse width of 0~2 ms on a 10μH inductive load, with only 24V DC supply voltage. It can generate a pulse magnetic field of up to 0.125T. , which verifies the feasibility of the scheme. Circuit simulations verify the current boost effect of the capacitor, and compare the current boost effect with different charging times. A stronger pulsed magnetic field can be obtained by increasing the number of parallel branches.

Keywords: XRAM circuit; inductive energy storage; pulse current; pulse magnetic field

脉冲发生器能够产生脉冲电场和脉冲磁场[1-2],脉冲磁场技术在治疗心血管疾病[3]、骨质疏松症[4]、慢性疾病[5-6等生物医学领域[7-8]有着广泛的应用,传统的脉冲磁场设备通常采用大容量电容进行储能[,体积大且放电速度较慢。而电感储能具有更高的储能密度和更快的放电速度[10]。由于脉冲磁场主要与电流大小有关,电感储能型脉冲电源对初级电源的电压要求不高。当前电感储能型脉冲电源的典型拓扑模式主要有2种:XRAM模式和 meat grinder模式[11],前者利用多级电感串联充电和并联放电实现电流倍增,后者利用磁通压缩原理实现电流倍增

XRAM电路是通过切换开关将电感由串联充电转换为并联放电,从而在负载上获得急剧上升的脉冲电流,理论幅值为各电感电流之和[12-14]。这种拓扑可以通过调整电感的级数来改变输出电流的大小,拓展性较强,方便构建不同能级的电源。较高能级一般选用晶闸管,但必须用inversecurrent commutation opening switch(ICCOS)来确保晶闸管可靠关断[15]。本文所需能级较低,因此选用MOSFET开关代替晶闸管,全控型器件可以通过驱动信号控制实现可靠关断,结构简单[16-17]。实现脉冲磁场需要使用储能能力强的大体积电感,为了减小实物体积,本文在电感与XRAM初级电源之间加入电容来升压,预先提高电流,进而在电感量较小的情况下实现更大电流,产生更大的脉冲磁场。FPGA控制的MOSFET开关管在充电回路能够通过调节储能电感的充电时间来调节脉冲幅值,在放电回路能够调节脉宽[18]

登录APP查看全文

猜你喜欢

电感磁场储能
售后已鸣枪!传统车企打响全方位保卫战
中车永济电机公司:首个飞轮储能项目取得新突破
电感耦合等离子发射光谱法同时测定锑矿石中的锑和银
国润储能全钒液流电池擎起太原机场“光储直柔”新标杆
基于飞蛾扑火算法的分布式储能选址定容优化方法研究
ICP-AES法测定水中10种重金属元素
车载塑封半桥功率模块设计与研究
电化学储能电站监控系统测试技术应用分析
西安的“磁场”
为什么地球有磁场呢