基于自适应模拟退火优化算法的车轮阻风板降阻分析
2025-07-04古静陈亿杜亚非黄维杰张全周王庆洋
主题词:降阻优化全局寻优计算流体动力学仿真风洞试验 自适应模拟退火中图分类号:U461.1 文献标志码:A DOI:10.19620/j.cnki.1000-3703.20241010
Analysis on Aerodynamic Drag Reduction of Vehicle Wheel Deflector Based on ASA Optimization Algorithm
Gu Jing,Chen Yi,Du Yafei,Huang Weijie,Zhang Quanzhou,Wang Qingyang (China Automotive Engineering Research Institute Co.,Ltd., Chongqing 401122)
【Abstract】Inorder tooptimize theunderbody flow fieldof vehicleefficientlyandreduce aerodynamicdrag,this paper takesaelectricvehicleastheresearchoject,andproposesamultivariatejoint globalotimizationmethod.Firstly,osidering the influenceofRPRfixturess,the methodwhichcombines CFD simulationandwind tunneltest isapplied toverify the efectivenessoftheinitialoptimizationschemeandthereliabilityoftheanalysismethod;Then,basedonDOE,surogatemodel and ASAalgorithm,twooptimizationschemes areused toreduceaerodynamicdrag:optimizationoffrontwheeldeflector,and jointoptimizationoffrontandrearwheeldeflector.Finalywindtunneltestsareconductedforverification.Thetestesults showthat,multivariateoptimizationoffrontwheeldeflectorhasthebestdragreductionefect,thedragcoeficientoftheoptimal scheme is reduced by 5.5% compared to the original model.
Key words:Aerodynamic optimization,Global optimization,Computational Fluid Dynamics (CFD) simulation,Wind tunnel test, Adaptive Simulated Annealing (ASA)
【引用格式】古静,陈亿,杜亚非,等.基于自适应模拟退火优化算法的车轮阻风板降阻分析[J].汽车技术,2025(6):54-62. GUJ,CHENY,DUYF,etal.AnalysisonAerodynamicDragReductionof VehicleWhee Deflector BasedonASA OptimizationAlgorithm[J].Automobile Technology,2025(6):54-62.
1前言
近年来,国内外专家学者对车轮降阻的研究日趋完善,主要通过车轮本身优化和在轮罩上增加阻风板等方法对车轮周围的气流进行有效梳理,而在轮罩上增加阻风板是近年来车轮降阻各类研究中最重要也是最具性价比的方向。综合AndreasKremheller和Simone的研究发现,合适的前轮阻风板形状和位置可使降阻效果达到最优,且简单的矩形形状是最有效且经济的解决方案。王夫亮[、贾青和李蛟5研究了前轮阻风板高度对整车风阻性能的影响规律。随着研究的逐步深人,专家学者们开始聚焦于阻风板多个设计变量对整车风阻性能的影响规律及降阻机制探索。综合陆润明周建川[李冠群的研究得出阻风板遮挡轮胎Z向高度和 Y 向宽度是最为关键的因素。
以上研究成果大多基于计算流体动力学(Computa-tionalFluidDynamics,CFD)分析的方法进行阻风板降阻研究,并且依靠经验进行阻风板优化方案制作及验证分析,未提前考虑风洞中车辆限位装置(RockerPanelRestraint,RPR)夹具对方案贡献量的影响,存在优化盲自性和低效性,难以确保优化方案能达到实测最优。
为解决上述问题,本文首先在分析模型中加入RPR夹具,应用CFD仿真分析和风洞试验相结合的方法,验证某纯电轿车初始方案的有效性和仿真分析精度。……
