用于 MEMS 振镜激光扫描的显微物镜设计
2023-07-21王兴宇杨照清薛萌郭汉明
王兴宇 杨照清 薛萌 郭汉明



摘要:为满足微机电系统(micro-electro-mechanical system ,MEMS)二维激光扫描系统对显微物镜小入瞳直径、大入射角度、大视场的要求,利用光学设计软件Zemax设计了一款入瞳直径为1.1 mm,可匹配 MEMS 二维振镜±18°大扫描角度的近红外无限共轭微型显微物镜。该物镜总长小于23 mm,数值孔径为0.4,分辨率为1.26?m,工作距为900?m,各项像差校正良好,满足使用需求。设计结果表明,该微型显微物镜可满足便携式皮肤检测仪器的 MEMS 二维振镜激光扫描系统的应用要求。
关键词:光学设计;显微物镜;近红外;大视场;MEMS 振镜
中图分类号: TH 742 文献标志码: A
Design of microscope objective for laser scanning of MEMS galvanometer
WANG Xingyu1,YANG Zhaoqing1,XUE Meng1,GUO Hanming1,2
(1. School of Optical-Electrical and Computer Engineering, University ofShanghai for Science and Technology, Shanghai 200093, China;
2. Shanghai Key Laboratory of Modern Optical System, University ofShanghai for Science and Technology, Shanghai 200093, China)
Abstract: In order to meet the requirements of micro-electro-mechanical system (MEMS) two- dimensional laser scanning system for microscope objective with small entrance pupil diameter, large incident angle and large field of view, a near-infrared infinite conjugate microscope objective with an entrance pupil diameter of 1.1 mm and a large scanning angle of ±18° is designed by using optical design software Zemax. The total length of the objective lens is less than 23 mm. The numerical aperture reaches 0.4 and the resolution is 1.26?m. The working distance is 900?m. The aberration correction is good.The designed microscope objective can meet the needs of use. The results show that the microscope objective can meet the requirements of MEMS two-dimensional galvanometer laser scanning system for portable skin detection instruments.
Keywords: optical design ; microscope objective ; near infrared ; large field of view ; MEMS galvanometer
引言
显微物镜作为光学扫描系统的重要部件,很大程度上决定着光学扫描系统的成像性能[1-2]。近年来,随着科学技术的发展,基于微机电系统(micro-electro-mechanical system , MEMS)二维振镜的光学扫描系统被广泛应用在便携式皮肤成像仪、共聚焦内窥镜等小型化、高光学分辨率、高成像速度的医疗检测仪器中[3-6]。这些光学扫描系统要求体积小、易集成、高像质,相应的显微物镜则必须符合小尺寸、高分辨率、低像差、小入瞳直径的设计要求[7-9]。国内外研究人员已对相关显微物镜进行了一定的研究[10-13],在此基础上针对 HAMAMATSU 公司生产的 S13989-01H 系列 MEMS 二维振镜设计了一款与之配合使用的近红外无限共轭微型显微物镜,以 MEMS 二维振镜的相关性能参数作为光学系统初始条件,通过全视场点列图、 MTF 曲线图等参数评估其成像质量。设计结果可与 S13989-01H 系列 MEMS 二维振镜配合,应用于便携式皮肤成像仪中。
1 设计指标分析……p>
