商用车驾驶室顶部强度试验研究
2023-07-10牛梦杰李团阳武子涵
牛梦杰 李团阳 武子涵
摘 要:商用车驾驶室结构是汽车被动安全研究的主要内容之一,而车顶强度是其重要的评价指标。由于商用车本身质量大、危险性高,良好的结构设计可以从一定程度上保护事故中驾驶员的身体健康。本文主要针对某商用车型进行车辆顶部强度在摆锤试验台进行试验研究,试验根据GB26512-2021《商用车驾驶室保护》做出相应试验方案,根据试验结果为后续优化设计提供参考资料。
关键词:商用车 车顶强度 被动安全 摆锤试验台
Experimental Study on the Strength of the Top of the Commercial Vehicle Cab
Niu Mengjie,Li Tuanyang,Wu Zihan
Abstract:The cab structure of commercial vehicles is one of the main contents of automobile passive safety research, and roof strength is an important evaluation index. Due to the high quality and high danger of commercial vehicles, good structural design can protect the health of drivers in accidents to a certain extent. This paper mainly conducts a test study on the top strength of a commercial model on the pendulum test bench, and makes a corresponding test scheme according to GB26512-2021 “Commercial Vehicle Cab Protection”, and provides reference materials for subsequent optimization design according to the test results.
Key words:commercial vehicle, roof strength, passive safety, pendulum test bench
随着汽车行业的飞速发展,商用车的数量也在快速增长,商用车虽然本身具有体型大、视野好,但是目前商用车的交通事故统计结果来看,一旦事故发生,驾驶人员往往会受到严重伤害,甚至死亡[1]。目前多数汽车厂商通过优化设计驾驶室的结构来提高在交通事故中对乘员的保护,从而在一定程度上提高产品的竞争力。目前被动安全常见的研究形式有仿真和试验两种形式,仿真是通过精准的建模和准确的受力加载来进行研究,從一定程度可以减少产品研发周期和成本[2],但是也会出现一些细节问题是仿真所考虑不到;试验研究是直观准确的,通过加载前后的车体结构变化来判断乘员的生存空间,试验成本较高。
国外对汽车碰撞研究起步较早,上世纪70年代美国就已经开始理论计算对汽车碰撞进行研究;后来经过计算机仿真技术的发展,到90年代国外研究所建立了一个包括2.5万个单元的整车碰撞有限元模型,并得到碰撞过程的加速度相关数据[5]。……
