基于ZigBee的铁路信号灯失效无线预警监测系统的组网与实现
2021-09-10戴娜张兴强侯兴强
戴娜 张兴强 侯兴强
摘要:笔者主要介绍了如何通过ZigBee无线组网技术实现铁路信号机无线预警监测系统在车站内的组网,在该系统监测到信号灯使用情况后,能够及时的将监测到的信息通过无线传输的方式传到控制中心。该系统既可以在信号灯故障后进行报警,又能在灯泡失效前根据光强的波动提前给出报警提示。这种实时检测系统能提高铁路信号设备检测的可靠度,对保证列车进入区间安全运行有非常重要的意义。
关键词:ZigBee协议;无线组网;铁路信号机;
Abstract:The author mainly introduces how to network the railway signal wireless early warning and monitoring system in the station through the ZigBee wireless networking technology.After the system monitors the use of signal lights,it can timely transmit the monitored information to the control center through wireless transmission.The system can not only give an alarm after the failure of the signal lamp,but also give an alarm in advance according to the fluctuation of light intensity before the failure of the bulb.This real-time detection system can improve the reliability of the detection of railway signal equipment and is of great significance to ensure the safe operation of trains in the interval.
Key words:ZigBee protocol;Wireless networking;Railway signal;
1. 引言
随着物联网技术的迅速发展,无线传感器网络技术和远程控制技术的应用日益广泛,此技术在铁路信号系统中也有极大的使用空间。传统的铁路信号灯系统大多都为有线传输系统,但是有线传输的形式将占据比较多的空间资源,且现场施工受地理环境、城市规划布局等影响因素较大,间接加大了成本耗用量。以ZigBee协议为基础的无线信号灯控制系统,可有效将信号灯终端设备与网络系统进行连接,通过相关网络传输协议的设定,有效摆脱有线操控的局限性,一定程度上极大地节省了电力成本的消耗,且通过网络建构信息高效传输环境,可提高信号灯设备的实际运行质量。
2. ZigBee概述
ZigBee技术本質上是低功耗低速率的无线通信技术,其基于IEEE.802.15.4无线标准,使用2.4GHz频段,拥有低复杂度和短距离以及低成本等优点。
ZigBee的结构有四层,分别为应用层(ASP),网络层(NWK),物理层(PHY)和MAC层。ZigBee协议栈的核心部分在网络层。……
