Alginate core–shell microcapsule reduces the DMSO addition-induced osmotic damage to cells by inhibiting cellular blebs
2021-08-26ChengpanLiJingLiuQiangWuXiangyuChenWeipingDing
Chengpan Li,Jing Liu,Qiang Wu,Xiangyu Chen,Weiping Ding,*
1 Center for Biomedical Engineering,University of Science and Technology of China,Hefei 230027,China
2 Department of Electronic Science and Technology,University of Science and Technology of China,Hefei 230027,China
3 School of Biology,Food and Environment Engineering,Hefei University,Hefei 230601,China
4 Department of Precision Machinery and Precision Instrumentation,University of Science and Technology of China,Hefei 230027,China
5 Institute of Intelligent Machines,Hefei Institutes of Physical Science,Chinese Academy of Sciences,Hefei 230031,China
Keywords:Cell blebbing Microencapsulation Osmotic shock DMSO Cell viability
ABSTRACT In cryopreservation,the addition of cryoprotectant can change the intra-and extra-cellular osmotic pressure,affect the cell morphology,and induce blebs on the plasma membrane.In this study,the blebs of cells microencapsulated in the alginate microsphere induced by osmotic shock were studied,and the effects of microencapsulation on bleb size and cell viability were determined.Firstly,a coaxial co-flow focusing device was applied to generate cell-laden microcapsules using alginate hydrogel in this paper.Then,cellular blebs induced by DMSO with various concentrations under microencapsulation were compared with that when non-encapsulated,and the dynamic process of cellular bleb was investigated.Finally,the qualitative relationship between bleb size and cell viability in the presence of DMSO was built,and thus the effects of microencapsulation on bleb size and viability were evaluated.The results show that the bleb size is smaller and the cell viability is higher,and cell microencapsulation can significantly inhibit the excessively large blebs generated on the cell membrane and reduce the osmotic damage to cells when loading cryoprotectant and then to improve cell viability during cryopreservation.This work can provide insights for optimizing cryoprotectant-loading protocols,offer a new avenue to study cell blebbing,and advance future research on cryopreservation of rare cells and biomaterials.
1.Introduction
Cellular blebs are the spherical-like fluid-filled protrusions on the cell membrane when the cell membrane separates from the underlying actin cytoskeleton or the cytoskeleton itself locally ruptures [1].Blebs are commonly seen in many types of cells during cell division[2],apoptosis[3]and migration[4,5].Besides spontaneous cell blebbing,blebbing can also occur if the extracellular environments are abruptly altered,such as temperature gradient[6],the confined microfluidic environments [7]and osmotic shock[8].Cryopreservation has become a currently widespread method,which is used for long-term storage of living cells and biological materials facilitating cellular therapy,regenerative medicine and biobanking.Cryoprotective agents (CPAs) are inevitable for cell survival in cryopreservation [9,10].During the addition of CPAs to cell suspension,cells are abruptly exposed to a hyperosmotic environment.The cells will first shrink due to the intracellular water leaving through the plasma membrane and then swell as permeable CPAs enter cell and water reenters to maintain the chemical potential.Subsequently,blebs are induced on the cell membrane,and the whole life cycle of blebs is dynamic.The formation and expansion of cellular blebs are closely related to the osmotic difference between the inside and outside of living cells;for different concentrations and types of CPAs,blebbing is also significantly different[8].Blebs can be regarded as a response of cells to anisosmotic conditions and a marker of the changes of cell membrane and cytoskeleton structure,which can provide valuable insights into osmotic shock.
Dimethyl sulfoxide(DMSO)is one of the common-used CPAs.It is a small amphiphilic molecule and has a number of important properties that make it extensively implemented,especially routinely employed as an effective penetrating cryoprotectant in cryopreservation [11].The loading of DMSO to cells prior to freezing can produce large osmotic shock.Apart from physical injuries caused by the ice formation during cryopreservation,the other major damage to cells is related to osmotic injury[9].Anisosmotic pressure of the extracellular solution can impair cell viability.Additionally,DMSO has the ability to modulate membrane structures due to its amphiphilic nature,such as membrane loosening and bilayer collapse[12,13].The intact actin cytoskeleton is essential to protect cells against osmotic damage [14].The stepwise addition of CPAs has been developed to reduce the osmotic damage to cells;however,it is a tedious work and time consuming.Therefore,minimizing the osmotic damage to cells plays a significant role for achieving high quality of preserved cells,especially for banking some precious cells and biomaterials.
Recently,the encapsulation of the living cells in hydrogels has been widely investigated in cryopreservation.Most studies focus on microencapsulation to explore the cell viability and cell functions [15,16] and to optimize the cryopreservation protocols [17–20];however,little attention has been paid to blebbing induced by osmotic shock and cell viability when cells are encapsulated in microcapsules.The differences between the blebs generated on cells encapsulated and non-encapsulated have not been deeply studied.The relationship between the size of blebs and the viability of cells has not been built.Therefore,further research about osmotic shock and the relationship between blebs and cell viability is of great significance for successful cryopreservation.
Here,the aim of this paper is to investigate cell blebbing induced by DMSO with various concentrations under microencapsulation with alginate hydrogel,and then to further study the effects of osmotic shock on plasma membrane structure and cell viability.We will study cell morphology,bleb size and cell viability during the dynamic process of blebs,and then develop a description to indirectly reflect the effects of osmotic shock on cells in regards to blebs induced by DMSO.This work can provide insights for optimizing CPA-loading protocols,offer a new avenue to study cell blebbing,and promote future study on cryopreservation of rare cells and biomaterials.
2.Materials and Methods
2.1.Materials
Human hepatic stellate cell line was stored in our laboratory.The cell culture medium was consisted of DMEM (Liquid,Gibco®Life Technologies,USA)supplemented with 10%fetal bovine serum(FBS,Life Science Products &Services,Australia origin),and 1%Penicillin-Streptomycin (Liquid,Gibco®Life Technologies,USA).Fluorescent dyes (Propidium Iodide,dark red power,≥95%;Hoechst 33342,green power,≥95%) were purchased from Sangon Biotech Company.DiI was from Aladdin Industrial Corporation and FITC-phalloidin was from Shanghai Maokang Biotechnology Co.,Ltd..Cell culture grade sodium alginate (white powder,>98%)was obtained from Sigma-Aldrich(St.Louis,MO).Calcium chloride anhydrous (white particles,≥96.0%) and sodium chloride (NaCl,tablets,≥96.0%)were obtained from Sinopharm Chemical Reagent Co.,Ltd.,Shanghai,China.Other materials for cell culture and other experiments in this study were obtained from Corning Incorporated,unless otherwise stated.
2.2.Cell staining
FITC-phalloidin and DiI were adopted to label the cytoskeleton and cell membrane,respectively.Before staining,the extracellular solution was sucked out with a pipettor so that only cells remained.For cytoskeleton staining,cells were firstly washed by PBS solution and immobilized by 4% formaldehyde fixative for 20 minutes,and washed using 0.05% PBST solution 3 times of 3 minutes each and then permeabilized using 0.2% Triton solution for 10 minutes.After blocked,using 2% bovine serum albumin(BSA,Sigma) for 2 hours at room temperature,the samples were washed using PBST 3 times of 3 minutes each.After that,cells were stained with 10 μg∙ml-1FITC-phalloidin conjugate solution (prepared with PBS solution and paired with 1%methanol)for 30 minutes at 37 °C,and then washed with PBS solution several times to remove unbound phalloidin conjugate solution.Similarly,the extracellular solution was removed with a pipettor before membranous staining,and then cells were stained with DiI solution(5 μmol∙L-1)and hatched at 37°C for 30 minutes.Finally,the samples were flushed with PBS several times for use.
2.3.Cell encapsulation
The co-flow focusing (CFF) device (Fig.1) was applied to yield core–shell microcapsules in the study [21].The key component of CFF is a coaxial needle.The coaxial needle consists of an inner needle (inner diameter 330 μm;outer diameter 640 μm) and an outer needle (inner diameter 1010 μm;outer diameter 1480 μm).A compressed air tank is connected to the hollow chamber and provides shearing force.Briefly,we employed cell suspension and 2%alginate(confected using deionized water)as the inner and outer liquids respectively,and then the fluids were introduced into the CFF by the syringe pumps (NE-1000,New Era Pump System Inc.,Farmingdale,NY,USA).The laminar flow was broken into microdroplets by nitrogen (pressure value:1.5 kPa).Finally,the micro-droplets were consolidated in 2% calcium chloride solution.The mixture with micro-droplets was centrifuged to remove CaCl2solution,and then washed with 0.9%NaCl solution several times.In this study,all solutions were prepared on a w/v basis in a sterile environment,unless otherwise stated.All the experiments were conducted at room temperature.
2.4.DMSO loading
Solutions with DMSO concentrations,10%,20%,30%,40% and 50% (v/v),were prepared with 0.9% NaCl.For the cells nonencapsulated,each well of the 24-well plate contained 20 μl of cell suspension with the density 1×106cells∙ml-1,and then 200 μl of DMSO solution was gently added to each well using a pipettor;for the group with the cells encapsulated,1 ml of 0.9% NaCl solution with cell-laden microcapsules (~20 microcapsules∙ml-1) was loaded to each well of the 24-well plate;then,NaCl solution was sucked out gently leaving only microcapsules in the well;and finally,200 μl of DMSO solution was gently added to each well through a pipettor (DMSO was loaded using one-step addition method).All experiments were performed at room temperature and repeated at least three times.
2.5.Cell viability assay
Two different fluorescent dyes,Hoechst 33342 and Propidium Iodide (PI),were adopted to detect the viability of cells [22,23].Before staining,cell-laden microcapsules were dissolved using 3%sodium citrate,and then 10 μg∙ml-1Hoechst/PI was mixed with cell suspension and used to stain hepatic stellate cells for 20 minutes at 37 °C for counting living/dead cells (DMSO was removed before cell viability test).
2.6.Image analysis
Cellular blebs and fluorescence images were observed and obtained using an inverted fluorescence microscope (Olympus IX 53,American Inc.,Center Valley,PA,USA).The cytoskeleton and plasma membrane were observed with a 60 × objective lens by a confocal fluorescence microscope (Nikon Eclipse TI,Japan).The image processing(cropping and regulating the brightness and contrast) was performed using NIS-Elements Viewer and MATLAB R2015a (The Math Works Inc.,Natick,MA).

Fig.1.Schematic of the co-flow focusing (CFF) device and the flow chart.
2.7.Data analysis
Here,p values were calculated using the two-tailed unpaired Student’s t test and are indicated as follows:*p <0.05 and**p <0.01.
3.Results and Discussion
3.1.Generation of core–shell microcapsules
To validate the structures of the core–shell microcapsules and obtain the relationship between flow rates and core–shell microcapsules,fluorescent micro-particles (Aladdin Industrial Corporation,Shanghai,China) as markers were added into the core fluid while the shell fluid was still 2% sodium alginate.
The bright-field and fluorescence images of microcapsules generated at different flow rates are shown in Fig.2a.The bright-field images show that the morphologies of the microspheres vary with the flow rates,and the fluorescence images demonstrate that micro-particles are well entrapped in the microspheres.Comparatively,the morphology of the core–shell structure is a regular sphere with the size roughly uniform (diameter:~230 μm) at the inner flow rate of 10 ml∙h-1and the outer flow rate of 60 ml∙h-1.Thus,we chose the core flow rate as 10 ml∙h-1and the shell flow rate as 60 ml∙h-1to encapsulate cells in microcapsules and to investigate cell blebbing in the following studies.The generated core–shell microcapsules containing cells under the 4 × and 40 × magnifiers are shown in Fig.2b.The images indicate that the size of microcapsules with cells is homogeneous and that cells are well encapsulated.
3.2.Cell blebbing induced by DMSO
To investigate the effect of microencapsulation on cellular blebbing,experiments of both cells encapsulated and nonencapsulated in microcapsules were conducted.The schematic diagram is shown in Fig.3a.
The images show that for cells both non-encapsulated and encapsulated,the number of blebs decreases whereas the size of blebs increases with DMSO concentration(Fig.3b,c).For example,the number of blebs at the DMSO concentration of 20% is significantly higher than that at 50% but the size of blebs at 20% is far smaller than that at 50% (Fig.3b).The number of blebs for the encapsulated cells is relatively less and the size of blebs is smaller.For example,at the DMSO concentration of 40%,the size of blebs for the encapsulated cells is obviously smaller than that for cells non-encapsulated,and the number is relatively less (Fig.3c).
The images also indicate that at a low concentration(e.g.10%or 20%),the plasma membranes are only disturbed slightly and thus small protrusions occur;at an intermediate concentration (e.g.30%),blebs occur on the plasma membranes;at a high concentration (e.g.40% or 50%),blebs are larger and like a sphere in shape.Particularly,in the presence of 50% DMSO,only one bleb appears on cell membrane,and the volume of the bleb is even larger than the cell volume (Fig.3b,c).
To investigate the blebbing mechanism at the concentration 30%,the dynamic process of cells was imaged(Fig.4).This process can be divided into three phases:shrinkage,recovery,and blebbing.In shrinkage phase,the volume of the cell rapidly decreases once the cell is bathed in DMSO solution.This phase lasts about 50 seconds.The cell volume restores gradually in recovery phase with DMSO entering the cell.The elapsed time is approximately 40 seconds.Thereafter,in blebbing phase,blebs are initiated and expanded subsequently.Multi-blebs with diversiform dimensions can be observed on the cell membrane.

Fig.2.The core–shell microcapsules generated in the study:(a) effect of the flow rates on the morphology and size of the core–shell microcapsules;(b) the core–shell microcapsules with cells under 10 ml∙h-1 of the inner flow rate and 60 ml∙h-1 of the outer flow rate.

Fig.3.Blebs induced by solutions with various DMSO concentrations:(a) schematic diagram;(b) cells were non-encapsulated;and (c) cells were encapsulated in microcapsules (the bottom images with a red dotted box were zoomed and shown on the top).

Fig.4.Cell blebbing induced by 30%DMSO:(a)the cell shrank first and then restored;thereafter,blebs were initiated and then expanded;(b)the fluorescence images of the cellular blebs.
3.3.The size of blebs
The samples were photographed at 5,30 and 120 minutes after loading DMSO,and then the average diameter of blebs was calculated.The results are shown in Fig.5a–c.The results show that for both cells encapsulated and non-encapsulated,blebs expand quickly within 30 minutes and then enlarge slowly or retract locally (Fig.5a,b).The average size of blebs of cells encapsulated is significantly smaller than that of cells non-encapsulated(Fig.5c).The minimum and maximum diameters of blebs for cells non-encapsulated are(2.7±0.4)μm and(7.5±0.7)μm respectively whereas for cells encapsulated they are(1.0±0.4)μm and(5.0±0.5)μm,respectively(Fig.5c).Here,blebs induced by 10%and 50%DMSO were not shown because they are either relatively small or grow quickly and finally rapture.Blebs at 10% DMSO can be regarded as the undulation of cell membranes while blebs at 50%DMSO usually are an indicator of cell apoptosis or necrosis [3].
3.4.Cell viability analysis
To assess the effect of microencapsulation on the viability of cells when loading DMSO with different concentrations,cells were stained and imaged by an inverted fluorescence microscopy,and the results are shown in Fig.5d.The viabilities of either encapsulated or non-encapsulated cells decrease with DMSO concentrations.For example,the viability of encapsulated cells is(94 ± 3.4)% at 10% DMSO whereas it is only (58 ± 8.6)% at 40%DMSO.The viability of cells encapsulated is far higher than the viability of cells non-encapsulated.For example,at the DMSO concentration of 30%,the viability of cells encapsulated reaches(81 ± 5.9)% while the viability of cells non-encapsulated is only(60 ± 8.2)% (p=0.024).
3.5.Discussion
When loading DMSO,cells are abruptly exposed to a hyperosmotic environment,and the intracellular water leaves through the plasma membrane,which deflates cell volume.With DMSO into cells,the volume of cells restores gradually.In the hyperosmotic environment,small soluble substances can freely exchange across the membrane,but large soluble particles remain inside the cell.The unbalanced osmotic pressure brings about water reentering.Sometimes,the final cell volume may be slightly greater than the isosmotic volume [14,24,25].In the shrinkage phase,the contraction of cells exerts pressure on the cytoskeletal structure and raises the intracellular hydrostatic pressure.DMSO can loosen cell membrane structure,increase cell membrane permeability and induce the formation of water pores [13].Conjointly,cell membrane detaches from the cytoskeleton and bleb occurs after the cell recovery.Cytoplasm can be regarded as a contractile and elastic network,and the subsequent expanding of blebs is boosted by the cytoplasm flowed in [26].In this study,cells were remained in the hyperosmotic environment;thus,the retraction of blebs was not observed (Fig.4a).In addition,to observe the dynamic process of cellular blebs,the cell was suspended in the cell culture plate on a microscope and DMSO was added gently to reduce the flow disturbance-induced excursion of the cell from the microscopic vision field.Since the extracellular isotonic solution was not rapidly replaced by the hypertonic solution (DMSO),the shrinkage time was long in this study.Therefore,methods that can rapidly replace the extracellular solution with no disturbance of cells need to be developed in the future.The presence of blebs indicates that either the cell membrane detaches from the underlying cytoskeleton or the cytoskeleton ruptures locally [1,14].By analyzing bright-field with fluorescence images (Fig.4),we can conclude that blebs driven by 30% DMSO results from the dissociation of the cell membrane from the cytoskeleton.

Fig.5.Statistical analysis:the bleb sizes of cells non-encapsulated(a)and cells encapsulated(b);the sizes of blebs(5 minutes after DMSO loading)(c);and the viability of cells (5 minutes after DMSO loading) (d) .
The generation of blebs is able to release hydraulic pressure in the cytoplasm to decrease the osmotic damage.Generally,there is a much larger bleb on the cell membrane among multi blebs whereas the others are relatively smaller because the intracellular pressure is gradually released (Fig.4).Blebbing induced by osmotic shock is believed a self-protection mechanism to reduce the osmotic damage to cells during cryopreservation [8].However,in the case of higher hyperosmotic stress,the mechanism is failed.The size of blebs is nearly linear with DMSO concentration (Fig.5c).In the presence of 20% DMSO,small protrusions appearing on the membrane function well and thus,the viability of cells is high (Fig.5d).In the presence of 40%,although blebs are generated on the cell membrane,some of them lose protection function as they are excessively large and then,the viability of cells is distinctly low.That is,the larger the bleb is,the lower the viability of cells is.
To make the cellular bleb small in presence of high DMSO concentrations,we encapsulated cells in the alginate microcapsule.The results show that the size of blebs is decreased significantly.The reason is that for the cells encapsulated,the alginate shell,as a diffusion barrier,effectively inhibits the rapid increase in the extracellular osmotic pressure[27].Thus,the change in the osmotic pressure difference across the cell membrane is moderate and then,the size of blebs generated is smaller(Fig.5b,c)and the viability of cells is higher (Fig.5d).
Unignorably,except for osmotic damage,the death of cells may be caused by the toxicity of DMSO[28].Here,we only showed the blebbing of cells within a microsphere with fixed size and shell thickness.In fact,microsphere size and the shell thickness may affect the number of blebs,the size of blebs,and the viability of cells.Moreover,the alginate concentration also affects the permeability of the shell of the microcapsule and then the transport of DMSO across the shell.Thus,an intensive study on these issues should be performed in the future.
4.Conclusions
In this study,we presented the DMSO-induced blebbing of cells encapsulated in the alginate core–shell microcapsule,compared the difference of the blebs of cells encapsulated and nonencapsulated,investigated the effect of DMSO concentration on the size of blebs and the viability of cells,and developed a qualitative relationship between the size of blebs and the viability of cells.The results show that for the cells encapsulated in microcapsules,the size of blebs is smaller and the viability of cells is higher.The higher the DMSO concentration is,the larger the size of blebs is.The viability of cells is negatively related to the size of blebs.The alginate core–shell microcapsule proposed here can significantly inhibit the excessively large blebs generated on the cell membrane and decrease the osmotic damage to cells during the DMSO addition.Thus,the microencapsulation of cells holds great promise to improve the viability of cells in cryopreservation.This work developed a description to reflect indirectly the effect of osmotic shock on cells in regards to blebs induced by DMSO and thus,can offer insights into the optimization of the loading of cryoprotective agents and contribute to the understanding of the mechanic behaviors of the cytoskeleton in cryopreservation of cells.
Declaration of Competing Interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Acknowledgements
This work was partially supported by the National Natural Science Foundation of China (81571768).We would like to thank Department of Precision Machinery and Precision Instrumentation at the University of Science and Technology of China for assistance.
杂志排行
Chinese Journal of Chemical Engineering的其它文章
- Zeolite A enhanced chitosan films with high water absorption ability and antimicrobial activity
- Influence of synergistic effect of LiNi0.8Co0.15Al0.05O2@Cr2O5 composite on the electrochemical properties
- Effect of sulfate on Cu(II) sorption to polymer-supported nano-hydrated ferric oxides:Experimental and modeling studies
- Sulfamic acid functionalized slag for effective removal of organic dye and toxic metal from the aqueous samples
- Optimization and evaluation of reduced graphene oxide hydrogel composite as a demulsifier for heavy crude oil-in-water emulsion
- In-depth investigation on the factors affecting the performance of high oil-absorption resin by response surface method
