基于多重相关状态采样的多元EWMA控制图
2021-04-09刘欣怡朱永忠
刘欣怡 朱永忠



摘 要:为提高控制图的监测效率,提出了一种基于多重相关状态采样的多元EWMA控制图,并利用改进后的马尔可夫链方法计算控制图的平均运行长度。根据不同参数下控制图的平均运行长度,分析了控制图在失控和受控状态下的性能表现,并与其它多元EWMA控制图进行比较。模拟结果表明,该控制图具有良好的监测能力。最后用一组模拟数据来说明该方法的使用。
关键词:多重相关状态采样;多元EWMA控制图;平均运行长度;马尔可夫链
中图分类号:O212 文献标识码:A
A New Multivariate EWMA Control Chart Using
Multiple Dependent State Sampling
LIU Xin-yi, ZHU Yong-zhong
(School of Science, Hohai University, Nanjing, Jiangsu 211100, China)
Abstract:To improve the efficiency of control chart, a new multivariate EWMA control chart has been developed using multiple dependent state sampling. The parameter of the proposed control chart as well as the average run length has been evaluated for different process settings using an improved Markov chain model. The proposed control chart has been evaluated using the average run length of the in-control and out-of-control process. The comparison of performance of the proposed and existing control chart has been studied. It has been shown that the proposed control chart using MDS sampling is more sensitive than the existing control chart. A simulated data is used to illustrate the procedure of the proposed control chart.
Key words:multiple dependent state sampling; multivariate EWMA control chart; average run length; Markov chain model
在产品质量控制和管理中,统计过程控制(Statistical Process Control, SPC)起着很重要的作用,其最重要的方法就是绘制统计过程控制图。現今,很多工业过程需要同时监测多个相关的质量特性,因此很多研究者着眼于多元控制图的研究。Hotelling[1]首先提出了用于监测较大偏移的T2控制图,随后Crosier[2]和Lowry等[3]分别于1988年和1992年提出了多元累计和(Multivariate Cumulation Sum, MCUSUM)和多元指数加权移动平均(Multivariate Exponentially Weighted Moving Average, MEWMA)控制图。MacGregor和Kourti[4],Lowry和Montgomery[5]及Montgomery[6]详细介绍了已有的几种多元控制图。
为了进一步提高控制图的灵敏度,很多学者提出了利用各种采样方法作为运行准则的控制图。Wortham和Baker[7]于1976年首先提出了多重相关状态(Multiple Dependent State, MDS)采样方法。Aslam等[8]于2015年将MDS采样和传统的计数控制图相结合,提出了一种基于MDS的计数控制图。Aldosari等[9]将MDS采样方法运用到了变化抽样区间的控制图中。2016年,Aslam等[10]提出了一种基于MDS的用于监测服从指数分布的质量特性的控制图。Raza等[11]研究了当质量特性服从多元泊松分布时,采用MDS方法对控制图的影响。……
