APP下载

嵌入式自动喷漆设备控制系统硬件可靠性预测

2020-12-23游达章张敏余炼刘攀

现代电子技术 2020年23期

游达章 张敏 余炼 刘攀

摘  要: 为了更好地研究嵌入式系统硬件可靠性,提出一种针对嵌入式系统硬件的马尔科夫模型分析方法。首先分析了嵌入式系统各模块的失效形式和故障类别,并根据故障类别将系统定义为不同工作状态;其次,根据状态转移关系建立状态转移矩阵,并求解计算马尔科夫状态转移方程,得到系统可靠度随时间的变化关系;最后,对嵌入式系统硬件局部可靠性作了敏感性分析。仿真结果表明,马尔科夫链模型能较为准确地描述硬件失效过程和预测某型喷漆系统硬件的可靠度,此外,提高电源可靠性有利于提升整个嵌入式硬件系统的可靠性。

关键词: 可靠性预测; 模型分析; 失效形式分析; 工作状态定义; 状态转移矩阵; 敏感性分析

中图分类号: TN876?34; TP302.7; TP202+.1              文献标识码: A           文章编号: 1004?373X(2020)23?0079?06

Abstract: In order to study the hardware reliability of the embedded system better, a Markov model analysis method for dealing with embedded system hardware is proposed. The failure form and fault category of each module in the embedded system are analyzed. The system is defined as different working state according to the fault category. The state?transition matrix is established according to the state transition relationship, and the Markov state transfer equation is calculated to obtain the relationship of variation of system reliability with time. A sensitivity analysis on the local reliability of the embedded system hardware is carried out. The simulation result shows that the Markov chain model can describe the failure process of the hardware and predict the reliability of the hardware of a certain type of paint spraying system, and improving power supply reliability is conducive to improving the reliability of the entire embedded hardware system.

Keywords: reliability prediction; model analysis; failure mode analysis; working status definition; state?transition matrix; sensitivity analysis

0  引  言

嵌入式系统的可靠性是指系统在规定的条件下和规定的时间内,完成规定功能的能力,而嵌入式系统硬件可靠性主要由印制电路板的可靠性来体现。为了预测和提高嵌入式系统的可靠性,不少学者投入很大的精力研究。文献[1]针对嵌入式实时控制系统可靠性难以评估的难点,通过使用Copula建立的ERCS软硬件综合可靠性模型,使得ERCS软硬件综合可靠性比独立时有所提高。文献[2]利用离散时间的马尔科夫链和半马尔科夫链分析了复杂多状态可修复A/n系统元件的多样性,导出了易行、有效的系统可靠度与可用度的预测模型。文献[3]针对嵌入式系统设计只注重功能不注重系统整体的问题,提出一种新的嵌入式可靠性评价方法,对于软件故障问题的预测描述更加全面。……

登录APP查看全文