混凝土布料机布料厚度测量系统
2020-12-23陈章华马月辉石彦辉
陈章华 马月辉 石彦辉



摘 要: 针对混凝土布料机布料厚度测量中超声波法存在测量盲区、激光测距法只能单点间断测量等问题,提出一种基于双目视觉的混凝土布料机布料厚度测量方法。利用双目视觉,通过基于区域和ORB特征相结合的立体匹配算法实现了对布料后预制混凝土构件任意一点混凝土厚度的大范围、连续、高精度测量。实验结果表明,采用该系统进行混凝土布料机布料厚度测量绝对误差不超过0.83 mm,完全满足测量要求。
关键词: 测量系统; 厚度测量; 图像预处理; 系统原理; 特征检测; 特征匹配
中图分类号: TN98?34; TP273.2 文献标识码: A 文章编号: 1004?373X(2020)23?0076?03
Abstract: As the ultrasonic measuring method has measurement blind area and the laser ranging method can only make single?point discontinuity measurement for concrete distribution thickness made by concrete distributor, a new distribution thickness measuring method based on binocular vision is proposed in this paper. By binocular vision and stereo matching algorithm based on region and ORB features, the continuous, wide?range and high?precision measurement of concrete thickness is realized at any position of precast concrete units. The experimental results show that the absolute error of the system for distribution thickness measurement is less than 0.83 mm, which fully meets the measurement requirements.
Keywords: measuring system; thickness measurement; image pre?processing; system theory; feature detection; feature matching
0 引 言
21世纪以来,预制装配式建筑技术得到了飞速的发展,在世界范围内已经成为建筑工业化潮流的主流发展趋势。在装配式建筑建造过程中,预制混凝土构件是其中的核心组成部分,预制构件的质量直接影响着装配式建筑的施工质量及使用性能。预制混凝土构件的质量在很大程度上取决于布料过程的检测精度,尤其对于比较复杂的构件,若不能准确测量布料过程中不同位置的混凝土厚度,则不能准确指导布料机进行布料,从而导致生产的预制构件达不到施工要求,影响整个建筑工程的质量和工期。
《装配式混凝土建筑技术标准GB/T 51231?2016》中规定预制混凝土楼板厚度允许偏差为5 mm,预制混凝土墙板厚度允许偏差为3 mm。目前,国内外混凝土布料厚度检测大多采用人工测量、超声波测距、激光测距等方法。……
