全成形典型针织半身裙设计与成形工艺研究
2020-12-23王莹莹王盼任婧媛
王莹莹 王盼 任婧媛



摘要: 为进一步促进全成形针织产品开发,文章以四针床电脑横机及其配套的SDS-ONE APEX3设计系统为依托,采用实验法和实例分析法,对全成形针织半身裙的成形方法进行研究。选取紧身裙、斜裙及喇叭裙为研究实例,根据其摆型特点,合理设计成形工艺,实现针织半身裙的一体成形。针对紧身裙造型贴体、活动不便特点,下摆采用C形编织工艺实现后开衩设计,以增加腿部活动量;结合斜裙裙身褶皱细碎、丰富等特点,裙摆自下而上采用均匀收针工艺实现裙身接片设计;由于喇叭裙下摆与腰部围度差较大,只能采用横向编织方式并配合局部编织工艺实现裙身较大自然波浪设计。
关键词: 全成形;针织半身裙;版型设计;工艺参数;成形工艺;四针床电脑横机
中图分类号: TS941.64
文献标志码: A
文章编号: 1001-7003(2020)11-0126-05
引用页码: 111302
Abstract: In order to further promote the development of fully formed knitted products, the experimental method and case analysis method were used to study the forming method of fully formed knitted skirts based on the four-bed computerized flat knitting machine and SDS-ONE APEX3 design system. In this paper, tight skirt, inclined skirt and flare skirt were selected as research examples. According to the characteristics of their swing, the forming process was designed reasonably to realize the integrated forming of knitted skirt. According to the characteristics of body fitting and inconvenient movement of tight skirt, C-shaped knitting technology was adopted in the hem to realize the back split design, so as to increase the amount of leg movement. Based on the characteristics of the inclined skirt, such as the fineness and richness of the pleats, the uniform stitching process was adopted from the bottom to the top to realize the design of the skirt splicing. Due to the large difference between the hem and waist circumference of the trumpet skirt, the only way to achieve a more natural wave design of the skirt body is to use the horizontal knitting method and partial knitting technology.
Key words: fully formed; knitted skirt; pattern design; process parameters; forming process; four-bed computerized flat knitting machine
全成形针织产品因一体成形,下机无须套口、缝合,穿着舒适柔美而受到人们的广泛关注[1]。现今市场上的全成形针织产品大多采用四针床电脑横机编织而成,国内虽然对全成形电脑横机组成结构及编织原理进行了一定研究,但在产品开发方面仍处于初级阶段,尤其是对全成形针织产品的成形方法研究非常少[2-4]。目前,全成形针织产业存在品类较少且制作困难等问题,因此,深入研究全成形针织产品成形工艺已经成为解决问题的重要途径。
针织半身裙作为一种最常见的女装款式,一直深受广大女性消费者的青睐。……
