APP下载

色酮-3-甲酸的合成工艺研究

2020-12-17仲芯颖褚朝森李天雪王晓丽胡玉涛

当代化工 2020年11期

仲芯颖 褚朝森 李天雪 王晓丽 胡玉涛

摘      要:以色酮-3-甲醛为原料制备色酮-3-甲腈,后经氢氧化钾水解制备色酮-3-甲酸。考察不同溶剂、氢氧化钾用量、氢氧化钾浓度、温度、时间对水解反应的影响。结果表明,最佳反应条件为:乙二醇做溶剂、氢氧化钾与色酮-3-甲腈物质的量比为5∶1、氢氧化钾浓度为9.7 mol·L-1、反应温度120 ℃、反应时间5 h,在上述条件下水解反应收率为90%。两步反应总收率为70%。产物经高效液相色谱检测,纯度为98.17%。

关  键  词:色酮-3-甲酸;色酮-3-甲醛;色酮-3-甲腈;水解

中图分类号:TQ031.5       文献标识码: A       文章编号: 1671-0460(2020)11-2423-04

Research on Synthesis of Chromone 3-Carboxylic Acid

ZHONG Xin-ying1, CHU Chao-sen1,2, LI Tian-xue1,2, WANG Xiao-li1, HU Yu-Tao1

(1. Lianyungang TCM Branch of Jiangsu Union Technical Institute, Lianyungang 222007, China;

2. Lianyungang Common Technological Center for Drug Research and Development, Lianyungang 222007, China)

Abstract: Using chromone-3-carboxaldehyde as starting material, 3-cyanochromone was prepared. Chromone 3-carboxylic acid was synthesized via hydrolysis of 3-cyanochromone by potassium hydroxide. The effect of solvent, potassium hydroxide dosage, potassium hydroxide concentration, temperature, time on hydrolysis reaction was studied. The result showed that the optimum reaction condition was as follows: using ethylene glycol as solvent, mole ratio of potassium hydroxide and 3-cyanochromone 5∶1, potassium hydroxide concentration 9.7 mol·L-1, 120 ℃, reaction time 5 h. Under above conditions, the yield of hydrolysis reaction was 90%. The total yield of the two-step reaction was 70%. The product purity determined by HPLC was 98.17%.

Key words: 3-Carboxylic acid; Chromone-3-carboxaldehyde; 3-Cyanochromone; Hydrolysis

色酮-3-甲酸(chromone 3-carboxylic acid)是色酮的衍生物[1],廣泛存在于自然界中,具有抗炎、抗菌、抗癌等生物活性[2-3]。其分子中含有羧基,可以制成酯、酰胺、酰氯等[4-5]有价值的有机合成中间体物质。

目前色酮-3-甲酸的合成方法已有报道。曹玲 华[6]等采用Jones氧化法,以色酮-3-甲醛为原料,在硫酸存在下,以丙酮为溶剂,用三氧化铬氧化制得产物,收率39%。该方法操作简便,但收率低,不经济。TARUN[7]等报道采用色酮-3-甲醛与硝基甲烷在锌和冰乙酸存在下制备硝酮化合物,后用硫酸在110~115 ℃下水解制备产物,收率90%。该方法中使用的原料硝基甲烷为危险化学品,不利于工业化生产。AMBARTSUMYAN[8]等用色酮-3-甲醛在六甲基磷酰三胺和苯存在下制备产物,收率5%,该方法收率太低,不可取。YOSHIMASA[9]等报道用色酮-3-甲醛与N-溴代丁二酰亚胺溴代后经水解制备产物,收率达93%。该方法需要用四氯化碳为溶剂在光照条件下完成,且溶剂使用量较大,难以放大生产。总体看来,目前色酮-3-甲酸的合成方法存在着收率低、操作难度大、原料危险性高等问题。……

登录APP查看全文