APP下载

钛合金双极微弧氧化膜层抗高温氧化性能

2020-12-17郝国栋罗丽妍苏爽月王永恒郝春丽邵长斌贾相华

当代化工 2020年11期

郝国栋 罗丽妍 苏爽月 王永恒 郝春丽 邵长斌 贾相华

摘      要:利用双极放电微弧氧化法,在硅酸盐体系中制备了以TiO2为主晶相的陶瓷膜层。采用XRD、SEM等表征手段,分析了膜层表面的相组成及表面形貌,研究了双电极放电模式对膜层抗高温性能的影响。结果表明:微弧氧化膜层的主晶相为锐钛矿相和金红石相TiO2,随着占空比的升高,金红石相TiO2的衍射峰增强,其含量增多,陶瓷膜表面微孔变多。抗高温氧化增重实验显示,双电极放电制备的微弧氧化陶瓷膜层抗高温能力明显提高。

关  键  词:TC4钛合金;双极微弧氧化;抗高温;陶瓷膜层

中图分类号:TQ050         文献标识码: A        文章编号: 1671-0460(2020)11-2383-05

Research on Preparation and Properties of Micro-arc

Bipolar Oxide Coating of Titanium Alloy

HAO Guo-dong*, LUO Li-yan, SU Shuang-yue, WANG Yong-heng,

HAO Chun-li, SHAO Chang-bing, JIA Xiang-hua

(Mudanjiang Normal University, Mudanjiang 157012, China)

Abstract: Ceramic coating was prepared on the surface of titanium alloy TC4 by bipolar discharge micro-arc oxidation in silicate system. XRD and SEM were used to analyze the phase composition and surface morphology of the coating. The influence of bipolar discharge mode on the high temperature resistance of the film was discussed. The results showed that the main crystal phase of the generated micro-arc oxidation coating was anatase phase and rutile phase TiO2. With the increase of duty ratio, the diffraction peak of rutile phase TiO2 increased, the surface micropores of the ceramic coating became more while the coating became rough. The high temperature oxidation resistance test results showed that the high temperature resistance of micro-arc oxide ceramics prepared by double electrode discharge was improved remarkably.

Key words:  TC4 alloy; Bipolar micro-arc oxidation; High temperature oxidation resistance; Ceramic coating

鈦合金因其诸多优良性能被广泛地应用于民用和军事等各个领域。在高温氧化情况下,TC4钛合金正常的工作温度为300~350 ℃,其安全使用温度为不超过350 ℃,一旦超过此温度条件便视为高温氧化范畴[1]。TC4钛合金在超过600 ℃时会高温氧化出现大块的表层脱落,这使得TC4钛合金的使用时间被缩短[2]。制备抗高温性能优良的陶瓷膜层,可为未来的工业应用奠定一定的理论基础[3-4]。

我国于20世纪60年代开始研究发展钛及其合金产业[5]。金属在高温条件下与氧气或氧化性介质发生反应导致金属的腐蚀,进而导致金属材料的性能以及组织结构会被高温氧化所破坏,导致合金使用寿命缩短[6-8]。为了解决钛合金在高温条件下表面性能被破坏所导致的金属内部被氧化腐蚀的这个问题,常见的增强钛合金抗高温性能的方法有:一是改变合金的内部组成,即改变合金成分;二是在合金表面进行表面处理。……

登录APP查看全文