FHDO重整生成油加氢技术用于混合二甲苯脱烯烃的研究
2020-08-23周嘉文崔国英
周嘉文 崔国英



摘 要:混合二甲苯馏分中微量烯烃通常通过采用白土精制技术进行处理,中国石油化工股份有限公司抚顺石油化工研究院(FRIPP)开发了FHDO重整生成油加氫技术用于重整生成油混合二甲苯中烯烃的脱除,配套开发的HDO-18催化剂在合适的工艺条件下表现出良好的活性和选择性。FHDO技术可以取代现用的白土精制技术,生产符合国标优级品的混合二甲苯产品。加氢脱烯烃技术不仅有效缓解了白土精制技术带来的环保压力,也符合脱烯烃工艺未来的发展方向。
关 键 词:催化重整;混合二甲苯;烯烃;选择性加氢
中图分类号:TE 426 文献标识码: A 文章编号: 1671-0460(2020)07-1456-04
Research on Mixed Xylene Deolefin by FHDO
Hydrogenation Technology of Reformate
ZHOU Jia-wen, CUI Guo-ying
(Sinopec Dalian Research Institute of Petroleum and Petrochemicals, Dalian Liaoning 116045, China)
Abstract: Olefins in mixed xylene are normally removed by clay refining technology. FHDO hydrogenation technology of reformate for mixed xylene deolefin was developed by Sinopec Fushun Research Institute of Petroleum and Petrochemicals (FRIPP). The matching HDO-18 catalyst has good activity and selectivity, the FHDO technology is suitable for selective hydrodeolefin of mixed xylene in catalytic reforming replacing the clay refining technology to produce mixed xylene products conforming to the national standard. The hydrogenation technology solves the environmental problem caused by industrial clay and also accords with the future development trend of aromatics deolefin process.
Key words: Catalytic reforming; Mixed xylene; Olefin; Selective hydrogenation
催化重整是生产高辛烷值汽油调和组分和苯、甲苯、二甲苯(BTX)等产品的重要加工手段。随着催化重整工艺的持续进步,连续重整技术已经广泛取代了固定床半再生重整技术,加之新型重整催化剂的开发,重整的反应苛刻度在提高,超低压操作技术已经普遍采用,随之带来的问题是催化重整生成油中的烯烃含量进一步增加。这些少量烯烃尤其是二烯烃容易聚合形成胶质覆盖催化剂表面活性中心影响其周期寿命,此外还会污染抽提溶剂并腐蚀下游系统设备[1]。这部分微量烯烃影响到了芳烃和溶剂油的产品质量,必须选择合适的手段加以脱除[2]。二甲苯是生产聚酯的重要原料,目前二甲苯产品市场紧缺,从重整生成油分馏出来的混合二甲苯中烯烃含量较高,无法满足吸附分离单元的要求,采用中国石油化工股份有限公司抚顺石油化工研究院(FRIPP)开发的FHDO重整生成油加氢技术,可以有效解决烯烃含量过高带来的一系列产品质量问题。……
