衬套刚度对悬架运动学特性参数影响分析
2020-05-03彭福泰师国靖
彭福泰 师国靖



摘 要:随着研究分析橡胶衬套发现橡胶衬套的刚度变化对汽车的悬架参数有重要的影响,进而直接影响着汽车的平顺性、操纵稳定性能。文章选择对橡胶衬套的刚度展开讨论,首先建立了带有橡胶衬套与转向系的双横臂独立前悬架的弹性连接运动学模型。以车轮外倾角、车轮前束角、主销后倾角、主销内倾角、轮距的变化、轮心处悬架垂直刚度等悬架参数为观察指标,设置悬架与整车的部分参数,给建立的模型输入左右车轮平行跳动激励,进行仿真对比,得出弹性连接状态下的模型综合结果更好。然后分析在弹性运动学状态下各个橡胶衬套刚度的改变对悬架运动学特性参数的影响大小,得出衬套径向刚度、轴向刚度的改变对悬架运动学特性参数综合影响,这对提升汽车的操纵稳定性与平顺性有较好的指导意义。
关键词:衬套;悬架;刚度;操作稳定性
Abstract: With the research and analysis of rubber bushings, it is found that the stiffness change of rubber bushings has an important impact on the suspension parameters of the car, which in turn directly affects the ride comfort and handling stability of the car. This article chooses to discuss the stiffness of the rubber bushing. First, a kinematic model of the elastic connection of the double wishbone independent front suspension with the rubber bushing and the steering system is established. Taking the wheel camber angle, wheel toe angle, kingpin camber angle, kingpin camber angle, wheelbase change, and suspension vertical stiffness at the wheel center as observation indicators, set some parameters of the suspension and the entire vehicle. The left and right wheels of the model are excited by inputting the left and right wheels, and the simulation results are compared to show that the comprehensive results of the model under the elastic connection state are better. Then analyze the impact of the changes
引言
隨着汽车步入大众生活,人们已经不再满足汽车能跑的基本需求,开始对汽车的乘坐舒适性以及稳定性方面提出更高的要求。衬套对车辆系统的影响主要为对悬架刚度和悬架K&C 特性的影响[1],而刚度和阻尼正是决定悬架性能的重要因素,汽车在行驶过程中悬架特性参数会随着轮胎的上下跳动或在外加载荷作用下而产生运动学上的变化,这对于汽车的操纵稳定性有重要影响,而橡胶衬套对提升操纵稳定性、平顺性和 NVH 性能方面是十分有利的。……
