APP下载

炭罐初始工作能力测量不确定度评定

2020-05-03游云鹏华晨李宪斌王茁杨雪

汽车实用技术 2020年7期

游云鹏 华晨 李宪斌 王茁 杨雪

摘 要:初始工作能力是汽油车用炭罐的一项重要技术指标,它表征的是炭罐对燃油箱溢出的碳氢化合物蒸气的吸附能力,以控制汽车的蒸發污染物排放,避免对环境产生损害。按照HJ/T 390-2007《环境保护产品技术要求汽油车燃油蒸发污染物控制系统(装置)》规定,可使用汽油或丁烷进行试验,文章应用丁烷法进行试验,对测量结果进行不确定度评定。阐述了炭罐初始工作能力的测量方法及所用仪器设备,建立了数学模型,并且分析了不确定度的主要来源,评定了各分量引入的不确定度,最终得到炭罐初始工作能力测量的扩展不确定度及相对扩展不确定度。

关键词:初始工作能力;炭罐;不确定度评定;丁烷法

Abstract: The initial working capacity is an important technical index of the canister of the gasoline vehicle, which represents the adsorption capacity of the canister to the hydrocarbon vapor spilled from the fuel tank, so as to control the emission of evaporative pollutants from the vehicle and avoid the damage to the environment. According to HJ/ T 390-2007 "Technical requirement for environmental protection product: Control system of fuel evaporation pollutants from vehicle with petrol engine", gasoline or butane can be used for this test. This paper applies the butane method for the test and carries out uncertainty evaluation of measurement results. In this paper, the measuring methods and instruments of the initial working capacity of the canister are described, the mathematical model is established, the main sources of uncertainty are analyzed, the uncertainty introduced by each component is evaluated, and the expanded uncertainty and relative expanded uncertainty of  the initial working capacity of t

前言

初始工作能力是汽油车用炭罐的一项重要技术指标,它表征的是炭罐对燃油箱溢出的碳氢化合物蒸气的吸附能力,以控制汽车的蒸发污染物排放,避免对环境产生损害。

按照标准规定,汽车在进行型式核准和生产一致性检查时都需要对炭罐进行检测,可使用汽油或丁烷进行试验,本文应用丁烷法进行试验,并对测量结果进行不确定度评定[1-2]。

测量不确定度表征合理地赋予被测量之值的分散性,与测量结果相联系的参数。测量不确定度一般由若干分量组成,其中一些分量可根据一系列测量值的统计分布,按测量不确定度的A类评定进行评定,而另一些分量则可根据基于经验或其他信息获得的概率密度函数,按测量不确定度的B类评定进行评定[3]。……

登录APP查看全文