基于有限元方法的某轻卡车架性能研究
2020-05-03黄勤何帆影宋磊曾宪波
黄勤 何帆影 宋磊 曾宪波



摘 要:为验证某轻型货车车架的各项性能是否满足设计要求,文章基于有限元方法对其进行模态分析,其前四阶模态频率均有效地避开了车架下结构的固有频率和发动机怠速激励频率,有效避免其发生共振问题。基于整车动力学模型,分解了车架十工况的强度载荷,采用惯性释放方法和动态输出载荷进行强度分析,各个工况下的车架均能满足强度要求,综上分析结果表明该轻卡车架的各项特性均满足设计要求。
关键词:轻卡车架;模态;强度
Abstract: Aiming at verifying the various characteristics of a light truck frame meet the design requirements. The frame modal analyzed based on the finite elements, the result showed that the first four free modes effectively avoid the excitation frequency of the frame structure of the natural frequency and the frequency of engine idle speed, so the resonance will be effectively avoided. The frame strength analysis base on inertia relief method and dynamic loading, the frame meets the strength requirements under various working conditions. The analysis results show that the characteristics of the frame meet the design requirements.
1 引言
车架是底盘、动力系统和车身系统各总成件的安装基体,这些总成的质量及其传给车架的力和力矩,可能造成车架强度和疲劳破坏[1-3]。其可靠性不仅关系到整车能否正常运行,而且还关系到整车安全性,车架强度对整车的性能尤为关键,所以深入研究车架的性能特性显得至关重要。为研究某轻卡车架的动静态性能,并验证其是否满足设计标准,本文基于有限元方法对其进行模态分析,以及基于动态载荷的强度分析。
2 车架模态分析
2.1 模態分析理论
结构系统固有模态频率及其模态振型是分析结构振动特性的基础,通过模态分析可以确定结构的振动特性[4-5]。
车架的振动方程为[6]:
式(1)中,[M]为结构总质量矩阵;C为阻尼矩阵;[K]为总刚度矩阵; 为加速度向量;{q}为位移向量。对应的特征值方程为:
式(2)中ω为结构固有频率,当车架固有频率和工作频率接近时,会发生共振,产生较大振幅,从而降低其使用寿命。……
