APP下载

超高强度钢在汽车底盘零部件中的设计应用

2020-05-03田欢乐胡洪陈海陈志洋叶家富

汽车实用技术 2020年7期

田欢乐 胡洪 陈海 陈志洋 叶家富

摘 要:在汽车底盘零部件轻量化设计过程中,通过轻量化解决方案中的新材料应用和结构优化设计两个主要途径进行研究,以汽车底盘前悬摆臂轻量化设计为例,在同等工況条件下,一方面提出了采用高强度钢和超高强度钢的材料应用方案;另一方面提出以结构优化设计的双片扣合式和单片式的结构方式进行结构设计,建立高强度钢与双片扣合式、超高强度钢与单片式数学仿真模型。然后采用CAE方法对前悬摆臂L1、L2级工况进行分析对比。仿真结果表明:采用超高强度钢与单片式方案比高强度钢与双片扣合式方案具有更好的结构优化空间,更好体现出零部件薄壁化、中空化、小型化、复合化。采用超高强度钢方案轻量化方案较高强度钢减轻21%,轻量化解决方案效果明显。

关键词:超高强度钢;轻量化;底盘;前悬摆臂;双片式;单片式

Abstract: In the process of lightweight design of automotive chassis components, the application of new materials in lightweight solutions and structural optimization design are studied. Taking the lightweight design of front cantilever of automotive chassis as an example, under the same working conditions, on the one hand, the material of using high strength steel and ultra-high strength steel is proposed. On the other hand, it is proposed that the structural design should be carried out in the way of double-slice fastening and single-slice fastening, and the mathematical simulation models of high strength steel and double-slice fastening, ultra-high strength steel and single-slice are established. Then the CAE method is used to analyze and compare the L1 and L2 working conditions of the front cantilever. The simulation results show that the ultra-high strength steel and monolithic scheme have better structure optimization space than the high strength steel and double-piece buckle scheme, and better reflect the thin-walled, hollow, miniaturized and composite parts. The lightweight scheme of ultra-high strength steel is 21% less than that of high strength steel, and the lightweight solution has obvious effect.

1 引言

在保证汽车的强度和安全性能的前提下,尽可能地降低汽车的整备质量,从而提高汽车的动力性能,减少燃料消耗,降低排气污染。据相关数据统计整车重量减少100Kg相应油耗降低0.4L/100Km,CO2排量降低-10g/100km,因此轻量化已经成为世界汽车发展的潮流和趋势[1]。

汽车轻量化技术是设计、材料与制造技术的集成应用,实现汽车轻量化主要途径主要有两个途径:(1)新材料应用:主要采用轻量化材料和轻量化材料成型技术,以达到减轻零部件重量的目的。(2)结构优化设计:使零部件薄壁化、中空化、小型化、复合化以及对零部件进行结构和工艺改进等。……

登录APP查看全文