APP下载

便携式车辆动力电池绝缘监测仪的设计研究

2020-05-03毛明珠陈振斌赖佳琴卞文博胡皓文

汽车实用技术 2020年7期

毛明珠 陈振斌 赖佳琴 卞文博 胡皓文

摘 要:动力电池作为电动汽车行驶安全的关键部分,为了能够监测动力电池实时绝缘状态,本文设计了一种便携式绝缘监测仪,搭建了绝缘监测系统理论模型,利用Simulink仿真模拟验证其有效性。对绝缘监测仪进行了软硬件设计,通过台架实验分析测试数据得出,绝缘监测仪检测误差在5%以内,具有较高的检测精度。该监测仪可实时监测动力电池绝缘阻值,根据阈值判断动力电池绝缘故障,能够及时切断电池输出并声光报警,满足应用要求。

关键词:电动汽车;动力电池;绝缘监测;绝缘故障

Abstract: As a key part of driving safety of electric vehicle, in order to monitor the real-time insulation state of power battery, a portable insulation monitor is designed in this paper. The theoretical model of insulation monitoring system is built, and its effectiveness is verified by Simulink simulation. The hardware and software of the insulation monitor are designed. Through the experimental analysis of the test data, it is concluded that the detection error of the insulation monitor is less than 5%, and there is a high detection accuracy. The monitor can monitor the insulation resistance of power battery in real time, judging the insulation fault of power battery according to the threshold, meanwhile, cutting off the battery output and alarming driver in time,to meet the application requirements.

1 引言

电动汽车由于其高效、绿色环保的优势,成为了未来汽车行业的发展趋势[1]。

作为电动汽车的核心部件之一,动力电池很大程度上决定了汽车运行的动力性和安全可靠性。动力电池通常由多个单体电池“串并联”构成[2-4],工作时直流电压普遍高于300 V,加之电动汽车使用环境复杂,动力电池绝缘性能变化剧烈,容易受到温度[5-6]、湿度[7]、振动、电池液体腐蚀等影响。一旦高压系统的绝缘性能下降,若不能及时检测并处理,很可能会造成安全事故和人员伤亡。据统计结果显示,2018年以来中国电动汽车共发生起火事故已超过50起[8]。电动汽车自燃自爆事件的一个主要原因是动力电池发生绝缘故障。绝缘监测系统可实时监测动力电池绝缘状态并计算绝缘阻值,绝缘阻值的定义为:动力电池发生短路故障时,最大漏电流对应的动力电池正负端与地之间的阻值[9]。……

登录APP查看全文