浅谈国内外公路隧道检测车发展现状与研究
2020-03-07郑好孙心洁
郑好 孙心洁
摘 要:伴随着中国各省隧道的建成,我国关于隧道的任务正在从大量建造向建造与维护转型,传统的人工检测方法已经不能满足高效、精准的检测要求,急需一种无须封路的快速检测装备,多功能隧道检测车应运而生。文章先介绍了新规范中公路隧道的检测要求,及传统检测和新兴检测方法,阐述了国内外隧道检测车发展现状,分析了已投入使用的隧道检测车存在的问题,探讨了隧道检测车未来技术发展方向。
关键词:隧道检测;智能检测装备;检测车;隧道病害
中图分类号:U459.2 文献标识码:A 文章编号:1671-7988(2020)03-223-03
Abstract: With the completion of tunnels in each province in China, the mission on tunnels is shifting from large-scale construction to construction and maintenance. Traditional manual inspection methods cant meet the requirements of efficient and accurate. There is an urgent need for a rapid detection equipment that does not require traffic controls, and a multifunctional tunnel inspection vehicle has emerged. This paper first introduces the detection requirements of highway tunnels in the new specification, as well as the traditional detection and emerging detection methods. Explaining the development status of tunnel inspection vehicles at home and abroad. Then analyzing the problems of the tunnel inspection vehicles which has been put into use. Finally, the future technological development direction of tunnel inspection vehicles is discussed.Keywords: Tunnel inspection; Intelligent inspection equipment; Inspection vehicle; Tunnel diseaseCLC NO.: U459.2 Document Code: A Article ID: 1671-7988(2020)03-223-03
1 公路隧道檢测要求及方法
我国公路隧道发展迅速,截至2018年底,全国公路隧道总计17738处,总长共17236.1km,同比上一年增加1509处,1951km,根据隧道行业的发展,可以认为我国在隧道上的任务将从以建设为主转向建设与养护并重。交通运输部在2015年3月修订发布了《公路隧道养护技术规范》,《规范》对于土建结构分项权重进行了重新分配,其中结构破损权重最高,占比40%,而衬砌结构破损又包括衬砌裂缝、衬砌变形、移动、沉降、衬砌起层、剥落、漏渗水、衬砌腐蚀、衬砌背后空洞、衬砌厚度不足、钢筋缺陷八个指标,最终表现形式多为裂缝、衬砌变形移动和沉降、衬砌起层剥裸三种,因此这三者占比较高。
在检测过程中,《规范》要求至少能够识别0.2mm裂缝宽度,能观测并记录断面的沉降量及发展趋势,能经常性记录起层、剥落位置并及时保养维修。针对上述检测要求,我国现阶段多采用传统的人工检测方法,这种方法需要暂时进行路面交通管制,维护人员靠近隧道衬砌表面,使用相关仪器聚焦后读取记录数据,不仅检测效率低而且需要大量劳动力,其测量误差也较大。……
