APP下载

浅谈汽车涂层修补色差问题与解决方法

2020-03-02廖宗权

时代汽车 2020年20期

廖宗权

摘 要:文主本要对晶玉黄颜色A区大面积修补问题而导致SIP检验不合格GCA扣分进行了分析和讨论,并找到了问题的原因,通过5M1E法进行调查分析和现场检查,且制定了相应的对策,采取措施后,取得了较明显的效果,对整体车身涂装质量提升起到了较大的进步,达到质量标准要求,有效的控制晶玉黄修补产生的色差。

关键词:人员操作 问题原因 修补技巧 色差现象

Brief Discussion about the Problem of Color Difference in Automobile Coating Repair and its Solution

Liao Zongquan

Abstract:The main text of the article analyzed and discussed the GCA deduction for SIP inspection failure caused by the large-scale repair of CN100 crystal jade yellow color area A, and found out the cause of the problem, and conduct investigation and analysis and on-site inspection through the 5M1E method. In addition, corresponding countermeasures were formulated. After the measures were taken, more obvious results were achieved, which greatly improved the overall car body coating quality, reached the quality standard requirements, and effectively controlled the color difference caused by CN100 crystal yellow repair.

Key words:personnel operation, cause of the problem, repair skills, chromatic aberration phenomenon

1 概述

(一)顏色是眼睛对材料表面反射的色光的不同波长的接收,当今80%的汽车面漆是效果涂料

(二)对效果面漆颜色的视觉判断

颜色的接收取决于照射/观察角度(图2)

(三)效果面漆的表面外观依据照射条件(图3):

(四)影响色差的因素:

涂料:批次间差异

涂料:调漆缸或油漆桶里的油漆凝絮或沉淀

涂层:色漆层膜厚太薄露底

喷涂工艺:发花或干喷

喷涂设备:喷涂工艺(流量,转速,成型气,电压,仿形,喷涂相关参数)

输送设备:系统里前一种涂料未清洗干净或污染

2 存在的问题

晶玉黄因修补造成的色差一直以来是难解决的问题。由此修补过的晶玉黄送检合格率都比较低。数据统计,2013年4~6月份平均每月晶玉黄返修合格率的为50%左右,与其他颜色的返修送检合格率97%有很大的差距。对车身质量和班组生产效率造成影响,为更好的打造乘用车生产线,我们要从过程中控制质量,提高车间生产效率,消除人为质量缺陷,将晶玉黄修补的合格率原来平均每月50%提高至平均每月95%以上。

2.1 问题描述:

登录APP查看全文