基于1D和3D耦合的发动机进气歧管仿真研究
2020-02-25王学超杜延义陆国祥王晓燕
王学超 杜延义 陆国祥 王晓燕



摘 要:进气系统在很大程度上影响了发动机的动力性、经济性和排放性。前期建立了一维仿真模型,比较真实的反映了发动机的性能,但还是未能真实的反映出管道的真实结构,像一些拐角、突变区域等。进气歧管的设计校验中,虽然三维稳态和瞬态计算能够模拟各个支管的压力分布情况,但是仅用三维计算不能实时得到一维的准确边界,且计算时间太长,不能从整个发动机上模拟瞬态进气过程和谐振效应带来的进气不均匀性。因此,要在1D模型中获得更准确的瞬态边界条件来计算进气歧管的三维流动,或更进一步研究进气歧管结构形状对发动机性能的影响,来指导优化进气歧管的设计。文章以发动机1D燃烧开发软件为基础与3D流体软件相耦合来解决进气歧管设计中瞬态进气过程。关键词:进气歧管;一维-三维耦合;进气均匀性中图分类号:U464 文献标识码:A 文章编号:1671-7988(2020)01-90-04
Abstract: The intake system greatly affects the power, economy and emissions of the engine. One-dimensional simulation model was established in the early stage, which reflects the performance of the engine, but it still fails to reflect the true structure of the pipeline, such as some corners and abrupt areas. Although the three-dimensional steady-state and transient calculation can simulate the pressure distribution of each branch pipe in the design calibration of the intake manifold, it cannot get the accurate one-dimensional boundary in real time and fails to simulate the intake non-uniformity caused by transient intake process and resonance effect from the whole engine. At the same time, the long period of calculation in the 3D simulation is also a big issue. Therefore, more accurate transient boundary conditions should be obtained in the 1D model in order to calculate the three-dimensional flow of the intake manifold as well as the influence of intake manifold structure shape on engine performance for further optimization of intake main fold design. In this paper, the transient intake process in the intake manifold design are solved by coupling engine 1D combustion development software with 3D fluid software.Keywords: Intake manifold; 1D-3D coupling simulation; Intake uniformityCLC NO.: U464 Document Code: A Article ID: 1671-7988(2020)01-90-04
前言
進气歧管连接节气门和进气道,是发动机进气系统中的重要组成部分。它影响着发动机各个气缸的进气量以及进气均匀性,进而影响发动机的动力性、经济性和排放特性[1-2]。目前研究进气歧管有一维仿真,也有三维仿真。单纯的一维仿真计算只能获取进气歧管的基本数据,无法获得进气歧管内部气体流动状况,而三维仿真计算也仅仅考虑到进气歧管,不能实现与其它组件的关联。
为了进一步研究进气歧管结构形状对发动机性能的影响。……
