某电动汽车起步冲击和抖动测试分析
2020-02-25王朝建肖扬
王朝建 肖扬
摘 要:某电动汽车(以下简称“某车型”)D档起步时先有冲击现象后伴随整车抖动,严重影响车辆的驾乘舒适性。文章基于某主机厂在研车型存在的该问题进行测试分析,通过对振动信号的colormap进行分析,分析出传动系齿间间隙是导致冲击的原因,电机的阶次振动是导致起步抖动的主要原因;通过对比该车型与标杆车的扭矩变化曲线,提出后续优化标定方案。文章研究為电动汽车起步抖动优化设计提供依据,对整车NVH性能提升有重要意义。关键词:电动汽车;起步;抖动;测试分析中图分类号:U469.72 文献标识码:A 文章编号:1671-7988(2020)01-03-03
Abstract: The electric vehicle, D, starting, accompanied by vehicle impact and shake, which seriously affects the driving comfort of the vehicle. The article is based on the test and analysis of this problem in the research and development model of a host factory. By analyzing the colormap of the vibration signal, it is recognized that the clearance between teeth of transmission system is the cause of impact and the order vibration of the motor is the main cause of starting shake; by comparing the electric vehicle to the benchmark car, the torque variation curve is proposed, and the subsequent calibration optimization scheme is proposed. This paper provides a basis for the optimization design of creeping shake of electric vehicles, which is great significance to the improvement of NVH performance of the vehicle.Keywords: Electric vehicle; Starting; Shake; Test analysisCLC NO.: U469.72 Document Code: A Article ID: 1671-7988(2020)01-03-03
前言
车辆起步不仅要求平稳、快捷、而且要满足驾驶员的起步意图,同时要求能适应外部行驶环境的变化以及车辆自身参数的变化。从纯电动汽车起步平顺性考虑,起步时应避免产生使乘员感到不舒适的抖动、冲击和在传动系中产生过大的动载荷[1]。文章通过对驱动电机本体、方向盘及座椅导轨振动进行测试,通过试验手段分析起步抖动产生的原因,对整车NVH性能开发过程中VCU、MCU程序设计及驱动电机结构设计具有指导意义。
1 起步抖动测试
1.1 测试设备
本次试验借助LMS Test.lab数采前端及分析软件、CAN线、三向振动加速度传感器等附件完成。依据汽车行业针对整车振动问题的常规测试方法对驱动电机本体、方向盘、座椅导轨位置进行振动测试。
1.2 测试方案
通过对该车起步冲击和抖动问题进行主观评价,结合振动产生机理及现有的试验设备情况,制定如下测试方案:……p>
