基于DOE的某车型无骨刮片优化分析
2020-02-25孔金超杨桂林梁刚
孔金超 杨桂林 梁刚
摘 要:文章以某车型驾驶侧无骨刮片为例,运用Minitab软件进行试验设计(DOE),结合试验和软件分析确定了影响驾驶侧刮片刮刷质量最重要的因子是雨刮攻角,并通过软件预测:刮片导条平行度合格,攻角值为-3.5°/7.5°,胶条用富国胶条时,刮片理论刮刷合格率可达94.3%。文中的分析方法适用于所有车型的无骨刮片,为生产企业今后控制生产成本,制造无骨刮片起到借鉴作用。关键词:Minitab;DOE;无骨刮片;攻角中图分类号:U462.1 文献标识码:B 文章编号:1671-7988(2020)02-94-03
Abstract: Taking the boneless scraper on the driving side of a vehicle as an example, this paper uses Minitab software to design the experiment (DOE). Combining with the test and software analysis, the most important factor affecting the quality of the scraper on the driving side is the angle of attack of the wiper. The software predicts that if the parallelism of the scraper bar is qualified, the attack angle is -3.5°/7.5°, and the FUKOKU rubber is used, the qualified rate of theoretical scraping can reach 94.3%. The analysis method in this paper is applicable to all types of boneless scrapers, which can be used as a reference for enterprises to control production costs and manufacture boneless scrapers in the future.Keywords: Minitab; DOE; Boneless scraper; Attack angleCLC NO.: U462.1 Document Code: B Article ID: 1671-7988(2020)02-94-03
前言
雨刮是汽車上不可缺少的重要部件,而刮片不仅是雨刮的重要工作零件,又是汽车上的一个外观件。无骨刮片因其刮刷性能好、外观优美,逐渐取代传统的有骨刮片,被广泛的用在各种车型当中。传统的有骨刮片结构较为复杂,依靠骨架上多个支架提供压力使刮片的胶条和车窗玻璃保持接触,但由于胶条受力不均匀,容易造成漏刮,影响刮刷效果。无骨刮片的骨架部件结构简单,其依靠两根导条压在胶条上,实现胶条跟玻璃的无缝接触,刮刷过程中声音小、效果好。目前,生产厂家针对无骨刮片的设计和生产最直接有效的方法是试验法,通过试验来确定最佳的结构和参数,但这种方法往往试验量大、周期长,从而导致制造成本很高。文章基于DOE(试验设计),以某车型无骨刮片为例,运用Minitab软件设计合理的实验方案,通过开展试验,结合Minitab软件分析确定影响刮刷效果的关键因子,并预测满足要求且成本最低的刮片结构组合。……
